Select Your Country

Go to global website

  1. fi
  2. Products
  3. Industrial Communication and Interfaces
  4. Surge Protection
  5. Devices for Fieldbus
  6. M-LBAS-IA1.IE

M-LBAS-IA1.IE Surge ProtectorFieldConnex®

Key Benefits at a Glance

  • For Ethernet-APL spur ports
  • Intrinsically safe according to 2-WISE and FISCO
  • Installation on DIN mounting rail in cabinet or field junction box
  • Grounding of the cable shield via a gas discharge tube
Contact us
Product photo: Surge Protector M-LBAS-IA1.IE
Product photo: Surge Protector M-LBAS-IA1.IE
FieldConnex® interface
Approval
Product Compliance: Europe – CE
Ethernet-APL interface
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
  • DE
  • EN
DatasheetClassificationProduct DocumentationDesign / SimulationApprovals

Technical data of M-LBAS-IA1.IE

Surge protector, Ethernet-APL, control cabinet installation, Ex ia, Ex ec, indirect shield grounding
Design / MountingCabinet installation
Installation in hazardous areaZone 1
Interface typeEthernet-APL auxiliary device
Rated voltageUr30 V
Rated currentIr500 mA
Impulse rating2 kV/1 kA (category C1) per line
10 kV/5 kA (category C2) per line
1 kA (category D1) per line
Impulse discharge current (10/350 µs)Iimp0.5 kA per line
Nominal discharge current (8/20 µs)In
per line5 kA
total10 kA
Shield10 kA
Max. surge current (8/20 µs)Imax10 kA overstressed fault mode 3 acc. to IEC 61643-21
Voltage protection levelUp
Line/Earthmax. 1500 V C1 , 1 kA per line
max. 2100 V C2 , 5 kA per line
max. 50 V C3 , 50 A per line
max. 1300 V B2 , 50 A per line
Shield/Earthmax. 1500 V C1 ,
max. 1800 V C2 ,
max. 50 V C3 ,
max. 1300 V B2
Degree of protectionIEC/EN 60529
Climatic conditionsIEC 60721
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Surge protectionIEC 61643-21
EthernetEthernet-APL ,
IEEE 802.3 for 10BASE-T1L
Ambient temperature-40 ... 80 °C (-40 ... 176 °F)
Storage temperature-50 ... 90 °C (-58 ... 194 °F)
Relative humidity≤ 95 % non-condensing
Shock resistance15 g 11 ms
Vibration resistance1 g , 10 ... 150 Hz
Connection typescrew terminals
Core cross sectionsolid wire 0.5 ... 2.5 mm2 ,
stranded wire 0.5 ... 1.5 mm2
Housing materialPolyamide PA 6.6
Degree of protectionIP20
Mass32 g
MountingDIN mounting rail
EU-type examination certificateTÜV 22 ATEX 8786 X ,
TÜV 22 ATEX 8816 X
Marking2-WISE auxiliary device , FISCO
MarkingEx-Hexagon ll 3 G Ex ec llC T6 Gc ,
[exsign] ll 2 (1) G Ex ia [ia Ga] IIC T6 Gb ,
[exsign] ll 2 (1) D Ex ia [ia Da] lIIC T80°C Db ,
[exsign] l M2 (M1) Ex ia [ia Ma] l Mb
VoltageUi30 V
CurrentIi500 mA
Internal capacitanceCinegligible 0 nF
Internal inductanceLi negligible 0 µH
Directive conformity
Directive 2014/34/EUEN 60079-0:2018 ,
EN 60079-11:2012 ,
IEC TS 60079-47:2021
Supplementary information
IECEx approvalIECEx TUR 22.0017X
Approved forEx ec llC T6 Gc ,
Ex ia [ia Ga] IIC T6 Gb ,
Ex ia [ia Da] lIIC T80°C Db ,
Ex ia [ia Ma] l Mb
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
General Notes

Related News and Applications

Lue lisää tähän tuotteeseen liittyvistä uutisista ja sovelluksista.

Ethernet-APL scalability test with Pepperl+Fuchs Rail Field Switches at Endress+Hauser, ABB, Siemens, BASF
Products and Solutions
6.7.2023

Ethernet-APL Is Ready For Deployment

Pepperl+Fuchs participated in three load tests of a realistic Ethernet-APL setup with components from various manufacturers. The results confirm that Ethernet-APL in combination with PROFINET technology is a game-changer in industrial communication.
More information

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies