Select Your Country
IC-KP2-2HRX-2V1 RFID evaluation unit
Key Benefits at a Glance
- LED status indicator of bus communication and read/write heads
- Max. 2 read/write heads can be connected
- Alternatively 1 read/write head and 1 trigger sensor can be connected
Preferred Type
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
DE
- DE
- EN
- ZH
DatasheetFunctionClassificationInformative LiteratureProduct DocumentationDesign / SimulationApprovalsSoftwareRelated Products
Technical data of IC-KP2-2HRX-2V1
| Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485 |
| Number of read/write heads | max. 2 alternatively 1 read/write head and 1 trigger sensor | |
| UL File Number | E87056 | |
| MTBF | 80 a (Operation at +40 °C) |
| LEDs 1, 2 | Status indicator for read/write heads | |
| LEDs CH1, CH2 | green: read head detected red: Configuration error | |
| LED PWR/ERR | green: power on red: Hardware fault | |
| LED TxD | green: flashes in rhythm with the transmitted data | |
| LED RxD | green: flashes in rhythm of receiving data |
| Rated operating voltage | Ue | 20 ... 30 V DC , PELV |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 4 A incl. read/write heads | |
| Power consumption | P0 | 2 W Without read/write heads |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff |
| Interface type | serial | |
| Physical | RS-485 | |
| Protocol | ASCII | |
| Transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 Bit/s |
| Interface type | serial | |
| Physical | RS 232 | |
| Protocol | ASCII | |
| Transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 Bit/s |
| Electromagnetic compatibility | |||||
| |||||
| RoHS | |||||
| |||||
| Degree of protection | IEC 60529 |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 | |
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
| Degree of protection | IP67 | ||||||||||
| Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M4 earthing screw RS 232: M12 plug connection RS 485: M12 connector | ||||||||||
| Material | |||||||||||
| |||||||||||
| Installation | screw fixing | ||||||||||
| Mass | approx. 300 g | ||||||||||
| Dimensions | |||||||||||
| |||||||||||