Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
DoorScan-I
| Product Description |
| Replacement/extension sensor module for installation in the DoorScan® and TopScan sensor profile, multifunction interface module |
| General specifications |
| Operating mode | Background evaluation |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 2 |
| Performance level (PL) | PL d |
| Category | Cat. 2 |
| MTTFd | 2716 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 90 % |
| Indicators/operating means |
| Function indicator | Interface: Red LED: detection, operating reserve, fault code
Yellow LED: teach status
Green LED: blank status
Green LED: DIP switch status |
| Electrical specifications |
| Operating voltage | 24 V DC +/- 20 % |
| No-load supply current | 30 mA |
| Input |
| Test input | high level ≥ 15 V low level ≤ 2 V |
| Control input | Standby active at U = 11 V DC at 30 V DC |
| Output |
| Switching type | light-on
|
| Signal output | switchable NPN or PNP , short-circuit protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Response time | ≤ 52 ms
≤ 200 ms in boost operating mode |
| Conformity |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| Product standard | EN 12978 |
| Approvals and certificates |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| Mechanical specifications |
| Mounting height | max. 3500 mm |
| Degree of protection | IP54 (when mounted) |
| Connection | plug strip , 6-pin |
| Mass | approx. 30 g |
| Dimensions | |
| Height | 24 mm |
| Depth | 31 mm |
| Length | 126 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
DoorScan-I
Product Documentation:
DoorScan-I
| Manuals | Language | File Type | File Size |
| Manual | ENG | PDF | 2756 KB
|
Design / Simulation:
DoorScan-I
Associated Products:
DoorScan-I
| Accessories |
|
|
|
| Connecting cable between hinge side and leading edge side, Connection to interface module, Operating voltage: max. 300 V, Connection: 2 x plug-in terminalfa |
|
|
|
|
| Door transition cable to connect the sensor to the controller, Connection to interface module, Operating voltage: max. 300 V, Connection: screw terminal , 6-pinfa |
|
|
|
|
| Connecting cable for sensor modules, Serves as the internal bus connection for module communication, Ribbon cable, Up to 5 sensor modules can be connected, Operating voltage: max. 50 V, Connection: 5 x plug-in terminal, 8-pinfa |
|
|
|
|
| Cable adapter for configurable DoorScan presence sensor, Adapter for connecting cables (e.g., to glass doors, existing cables), Tool-free module mounting using snap-in mechanism, Connection: plug strip 6-pin , socket 8-pin , solder pins 8-pinfa |
|
|
|
|
| Cable adapter for configurable DoorScan presence sensor, Cable adapter for extending the ribbon cable, Tool-free module mounting using snap-in mechanism, Connection: socket 8-pinfa |
|
+49 621 776-0