Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic sensor UBC250-12GM-E5-V1

UBC250-12GM-E5-V1
  • High chemical resistance through PTFE coated transducer surface
  • Stainless Steel enclosure
  • 1 switch output
  • Temperature compensation
  • Programmable output functions
  • Program input

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  UBC250-12GM-E5-V1

General specifications
Sensing range30 ... 250 mm
Adjustment range50 ... 250 mm
Dead band0 ... 30 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 310 kHz
Response delayapprox. 50 ms
Electrical specifications
Operating voltage10 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 30 mA
Input
Input type1 program input
lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB
input impedance: > 4.7 kΩ, pulse duration: ≥ 1 s
Output
Output type1 switch output PNP Normally open/closed , programmable
Rated operating current100 mA , short-circuit/overload protected
Default settingSwitch point A1: 50 mm Switch point A2: 250 mm
Voltage drop≤ 3 V
Repeat accuracy≤ 1 %
Switching frequency≤ 8 Hz
Range hysteresis1 % of the set operating distance
Temperature influence± 1.5 % of full-scale value
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug M12 x 1 , 4-pin
Degree of protectionIP68 / IP69K
Material
HousingStainless steel 1.4404 / AISI 316L
O-ring for cover seal: Viton
TransducerPTFE (diaphragm surface)
Mass35 g
Dimensions
Length70 mm
Diameter12 mm

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: UBC250-12GM-E5-V1

Product Documentation: UBC250-12GM-E5-V1

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Instruction leaflet / BeipackzettelALLPDF620 KB
Safety and Security Documentation
Instruction manualENGPDF150 KB

Design / Simulation: UBC250-12GM-E5-V1

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP270 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
EPLAN macro EDZ / EPLAN Makro EDZALLEDZ61 KB

Approvals: UBC250-12GM-E5-V1

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0530CALLPDF46 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5419ALLPDF40 KB

Associated Products: UBC250-12GM-E5-V1

Accessories
Programming unitfa
Ultrasonic -deflector, Universal mounting possibilities, 90° sound deflection for difficult installation circumstancesfa
Single-ended female cordset, M12, V4A stainless steel, hygienic design, 4-pin, PP cablefa
Single-ended female cordset, M12, V4A stainless steel, hygienic design, 4-pin, PP cablefa
Mounting aidfa
USi-safety Sensor System

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.