AS-Interface Handheld VBP-HH1-V3.0-V1
- Addressing and programming AS-Interface nodes
- Displaying the assigned node addresses and the status of the inputs
- Setting outputs at the AS-Interface node
- Also supports profiles S-7.7.A.7 (Spec 3.0), S-0.B and S-7.B (AS Interface Safety at Work)
- The node connection is short-circuit and overload proof
- Additional M12 plug for external power supply for AS-Interface and AUX
- Connecting cable included with delivery
- Battery charger included with delivery
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of VBP-HH1-V3.0-V1
| Product Description |
|---|
| AS-Interface Handheld |
| General specifications | ||
|---|---|---|
| AS-Interface specification | V3.0 | |
| Operating mode | Plug-in charging unit, 230 V AC, included in the delivery package | |
| Indicators/operating means | ||
| Display | LC display | |
| Keyboard | membrane keys, 5 keys | |
| Electrical specifications | ||
| Operating duration | 8 h or ≥ 250 read/write procedures for fully charged battery | |
| Power supply | battery mode, please use only battery charger included with delivery to charge (charging time about 14 h) | |
| Interface | ||
| Interface type | AS-Interface, short-circuit and overload protected | |
| Open loop voltage | 28 V (internal power supply) | |
| Load current | 100 mA at 25 V (internal power supply) | |
| Interface 2 | ||
| Interface type | M12 connector for external power supply | |
| Physical | AUX: 24 V PELV, 2 A (not short-circuit proof) AS-Interface: 31,6 V PELV (DC or AS-Interface), 200 mA (short-circuit proof) |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | Handheld: EN 61326-1:2013 Plug-in charging unit EN 61000-3-2:2014 , EN 61000-3-3:2013 , EN 61000-4-2:2009 , EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-4:2012, EN 61000-4-5:2014+A1:2017, EN 61000-4-6:2014+AC:2015, EN 61000-4-8:2010, EN 61000-4-11:2004+A1:2017 , EN 55032:2015+AC:2016 , EN 55035:2017 |
|
| Low voltage | ||
| Directive 2014/35/EU | Plug-in charging unit EN 62368-1:2014+A11:2017 | |
| Standard conformity | ||
| Degree of protection | EN 60529:2000 | |
| Electrical safety | Plug-in charging unit EN 62368-1:2014+A11:2017 | |
| Emitted interference | Handheld: EN 61326-1:2013 Plug-in charging unit EN 55032:2015+AC:2016 , EN 55035:2017 |
|
| Noise immunity | Handheld: EN 61326-1:2013 Plug-in charging unit EN 61000-3-2:2014 , EN 61000-3-3:2013 |
|
| Ambient conditions | ||
| Ambient temperature | 0 ... 40 °C (32 ... 104 °F) | |
| Storage temperature | -20 ... 40 °C (-4 ... 104 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Material | ||
| Housing | plastic | |
| Mass | approx. 610 g | |
| Dimensions | ||
| Height | 34 mm | |
| Width | 80 mm | |
| Length | 214 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242692 |
| ECLASS 12.0 | 27242692 |
| ECLASS 11.0 | 27242692 |
| ECLASS 10.0.1 | 27242692 |
| ECLASS 9.0 | 27242692 |
| ECLASS 8.0 | 27279212 |
| ECLASS 5.1 | 27279212 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 39121535 |
Details: VBP-HH1-V3.0-V1
Function
The AS-Interface handheld VBP-HH1-V3.0-V1 is an addressing device according to ASInterface specification 3.0.
This addressing device is used to program AS-Interface slaves and for function testing purposes.
In addition, the following new functionalities have been integrated:
-
Permanent data interchange with AS-Interface slaves
-
Support of the data interchange with 4E4A slaves in ext. addressing mode
-
Display of the safety code for AS-Interface Safety at Work slaves
The AS-Interface connection adapter on the top of the addressing device is used for the connection of AS-Interface slaves (sensors, actuators and modules) to the addressing device. The following devices and models can be connected via a plug connection on the AS-Interface connection adapter to the addressing device:
devices with M12 plug, VariKont M system, VariKont system, FP model, AS-Interface module of models G1, G4, G16.
Please use the adapter cable VAZ-PK-1,5M-V1-G (included in the scope of delivery) for device models with integrated addressing jacks.
There is an additional M12 plug on the front side of the housing. It provides a connection possibility with external auxiliary voltage AUX for slaves, which expect this at the connection adapter. Due to the integrated decoupling coil it is also possible to connect DC- or AS-Interface voltage to energize the slave directly and to relieve the internal battery.
A connection cable for the extension is included in the scope of delivery.
Product Documentation: VBP-HH1-V3.0-V1
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Brief Instructions - VBP-HH1-V3.0* | ENG | 2006 KB | |
| Manuals | |||
| Manual VBP-HH1-V3.0* | ENG | 4223 KB | |
Approvals: VBP-HH1-V3.0-V1
| Declaration of Conformity | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2412E | ALL | 108 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7018 | ALL | 106 KB |
Associated Products: VBP-HH1-V3.0-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
This free PDF white paper compares the different TCP-based communication protocols (AMQP, OPC UA, MQTT, REST API) that have found their way up and are considered the enablers of IIoT and Industry 4.0. Get your free download now!
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.