Serviceline Industrial Sensors
Serviceline Explosion Protection
Safety light curtain SLC30-1050/133
- ATEX-approval for zone 2 and zone 22
- Sensing range up to 15 m
- Resolution 30 mm (hand protection)
- Self-monitoring (type 4 according to IEC/EN 61496-1)
- Safety outputs OSSD, external status displays OSSD
- Start/Restart disable
- Integrated function display
- Operating reserve indication
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of SLC30-1050/133
| Product Description |
|---|
| Safety light curtain |
| System components | ||
|---|---|---|
| Emitter | SLC30-1050-T/133 | |
| Receiver | SLC30-1050-R/133 | |
| General specifications | ||
| Effective detection range | 0.2 ... 15 m | |
| Light source | IRED | |
| Light type | modulated infrared light | |
| LED risk group labelling | exempt group | |
| Tests | IEC/EN 61496 | |
| Safety type according to IEC/EN 61496 | 4 | |
| Width of protected area | 0.2 ... 15 m | |
| Protection field height | 1050 mm | |
| Number of beams | 56 | |
| Operating mode | can be selected with or without start/restart disable | |
| Optical resolution | 30 mm | |
| Opening angle | < 5 ° | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Performance level (PL) | PL e | |
| Category | Cat. 4 | |
| Mission Time (TM) | 20 a | |
| PFHd | 1.5 E-8 | |
| Type | 4 | |
| Indicators/operating means | ||
| Operation indicator | 7-segment display in emitter | |
| Diagnostics indicator | 7-segment display in receiver | |
| Function indicator | in receiver: LED red: OSSD off LED green: OSSD on LED yellow: Protected area free, system start-ready |
|
| Stability alarm indicator | LED orange | |
| Control elements | switch for start/restart disable, transmission coding | |
| Electrical specifications | ||
| Operating voltage | 24 V DC (-30 %/+25 %) | |
| No-load supply current | Emitter: ≤ 100 mA receiver: ≤ 150 mA | |
| Protection class | III | |
| Input | ||
| Activation current | approx. 10 mA | |
| Activation time | 0.03 ... 1 s | |
| Test input | Reset-input for system test | |
| Function input | Start release | |
| Output | ||
| Safety output | 2 separated fail safe semiconductor outputs | |
| Signal output | 1 PNP, max. 100 mA for start readiness , short-circuit protected 1 PNP, max. 100 mA for OSSD status , short-circuit protected |
|
| Switching voltage | Operating voltage -2 V | |
| Switching current | max. 0.5 A | |
| Response time | 20 ms | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| Machinery Directive 2006/42/EC | EN ISO 13849-1:2008 ; EN 61496-1:2013 | |
| EMC Directive 2004/108/EC | EN 61000-6-4:2007+A1:2011 | |
| Standard conformity | ||
| Standards | IEC 61496-2:2013 | |
| Approvals and certificates | ||
| CE conformity | CE | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| TÜV approval | TÜV | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Relative humidity | max. 95 %, not condensing | |
| Mechanical specifications | ||
| Housing length L | 1160 mm | |
| Degree of protection | IP66 | |
| Connection | M20 cable gland , Cable diameter ∅5.5 ... 13 mm , terminal compartment with screw terminals, lead cross-section max. 1.5 mm2 |
|
| Material | ||
| Housing | extruded aluminum profile, RAL 1021 (yellow) coated | |
| Optical face | Plastic pane | |
| Mass | per 3450 g | |
| Dimensions | ||
| Width | 52 mm | |
| Depth | 55 mm | |
| Length | 1160 mm | |
| Equipment protection level Gc (nA) | ||
| ATEX marking |  II 3 G Ex nAc op is IIC T4 |
|
| Directive conformity | 94/9/EG | |
| Standards | EN 60079-0:2009 , EN 60079-15:2010 , EN 60079-28:2007 | |
| Equipment protection level Dc | ||
| ATEX marking | II 3 D Ex tc IIIC T90 °C |
|
| Directive conformity | 94/9/EG | |
| Standards | EN 60079-31:2009 | |
| General information | ||
| Use in the hazardous area | see more details for the use in hazardous areas | |
| Category | 3G; 3D | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272704 |
| ECLASS 12.0 | 27272704 |
| ECLASS 11.0 | 27272704 |
| ECLASS 10.0.1 | 27272704 |
| ECLASS 9.0 | 27272704 |
| ECLASS 8.0 | 27272704 |
| ECLASS 5.1 | 27272704 |
| ETIM 9.0 | EC002549 |
| ETIM 8.0 | EC002549 |
| ETIM 7.0 | EC002549 |
| ETIM 6.0 | EC002549 |
| ETIM 5.0 | EC002549 |
| UNSPSC 12.1 | 46171620 |
Details: SLC30-1050/133
Product Documentation: SLC30-1050/133
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Safety Manual | ENG | 2257 KB |
Design / Simulation: SLC30-1050/133
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 199 KB |
Associated Products: SLC30-1050/133
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.