Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
OBE1500-R2F-SE2-L
Product Description |
Thru-beam sensor, flat design, space-saving M2 mounting, 1500 mm detection range, red light, dark on, PNP output, fixed cable |
System components |
Emitter | OBE1500-R2F-S-L |
Receiver | OBE1500-R2F-E2-L |
General specifications |
Effective detection range | 0 ... 1500 mm
|
Threshold detection range | 2100 mm
|
Light source | LASER LIGHT |
Light type | modulated visible red light , 680 nm |
Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 680 nm |
| Beam divergence | > 5 mrad |
| Pulse length | approx. 3 µs |
| Repetition rate | approx. 16.6 kHz |
| max. pulse energy | 8 nJ |
Angle deviation | approx. 0.5 ° |
Object size | typ. starts from 0.7 mm ; typ. from 0.3 mm (after teach-in) |
Diameter of the light spot | approx. 20 mm at a distance of 1.5 m |
Opening angle | approx. 1 ° |
Optical face | frontal |
Ambient light limit | EN 60947-5-2 : 25000 Lux |
Functional safety related parameters |
MTTFd | 806 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
Electrical specifications |
Operating voltage | 12 ... 24 V |
No-load supply current | < 10 mA |
Protection class | III |
Input |
Test input | Test of switching function at 0 V |
Switching threshold | Teach-In input |
Output |
Switching type | NO contact / dark-on |
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Switching voltage | max. 30 V DC |
Switching current | max. 50 mA , resistive load |
Voltage drop | ≤ 1.5 V DC |
Switching frequency | approx. 2 kHz |
Response time | 250 µs |
Conformity |
Product standard | EN 60947-5-2 |
Laser safety | EN 60825-1:2007 |
Approvals and certificates |
UL approval | E87056 , cULus Recognized, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Ambient conditions |
Ambient temperature | -10 ... 60 °C (14 ... 140 °F) |
Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 2 m fixed cable |
Material | |
| Housing | PC (Polycarbonate) and Stainless steel |
| Optical face | PMMA |
| Cable | PUR |
Mass | approx. 20 g per sensor |
Tightening torque, fastening screws | 0.25 Nm |
Dimensions | |
| Height | 25.5 mm |
| Width | 12 mm |
| Depth | 4.1 mm |
Cable length | 2 m |
Classifications
System | Classcode |
ECLASS 13.0 | 27270901 |
ECLASS 12.0 | 27270901 |
ECLASS 11.0 | 27270901 |
ECLASS 10.0.1 | 27270901 |
ECLASS 9.0 | 27270901 |
ECLASS 8.0 | 27270901 |
ECLASS 5.1 | 27270901 |
ETIM 9.0 | EC002716 |
ETIM 8.0 | EC002716 |
ETIM 7.0 | EC002716 |
ETIM 6.0 | EC002716 |
ETIM 5.0 | EC002716 |
UNSPSC 12.1 | 39121528 |
Details:
OBE1500-R2F-SE2-L
Product Documentation:
OBE1500-R2F-SE2-L
Design / Simulation:
OBE1500-R2F-SE2-L
Approvals:
OBE1500-R2F-SE2-L