Display Unit DPU1200-J2-22F*
- 10 point multi-touch sensor option allows design of modern user interfaces
- Highly resistant to cleaning agents with stainless steel bezel and seamless glass design
- Design optimized for easy cleanability
- Low-power consumption and heat dissipation due to LED backlight technology
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of DPU1200-J2-22F*
| Product Description |
|---|
| Display Unit |
| Supply | ||
|---|---|---|
| Power consumption | average: 22 W at maximum brightness: max. 27 W |
|
| Indicators/operating means | ||
| Display | ||
| Type | LC display with LED backlight Optically bonded | |
| Screen diagonal | 54.61 cm (21.5 inch) | |
| Resolution | 1920x1080 (Full HD) , Aspect ratio 16:9 | |
| Color depth | 16.7 Mio. | |
| Contrast | 5000 (typical) | |
| Brightness | 300 cd/m2 (nit) | |
| Reading angle | 175° in all directions | |
| Life span | back lamp life: 50.000 hrs typical half life , at 20 °C (68 °F) | |
| Input devices | ||
| Touch screen | optional: projective capacitive, 10 finger multi-touch, glove-friendly | |
| Interface | ||
| Interface type | interface v1.0 from Pepperl+Fuchs for computing units from Pepperl+Fuchs Bluetooth v4.0 , communication distance up to 30 m in open terrain (optional) , transmission power : +8 dBm |
|
| Transmitter frequency | 2.402 ... 2.48 GHz | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) non-Bluetooth products only |
|
| Radio and telecommunication terminal equipment | ||
| Directive 2014/53/EU | EN 301 328 V2.1.1 EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 Bluetooth products only |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012-09 | |
| Ambient conditions | ||
| Operating temperature | 0 ... 50 °C (32 ... 122 °F) (normal operation) -20 ... 50 °C (-4 ... 122 °F) (after 1 hour of operation) |
|
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 93% at 40°C, non-condensating, according to EN 60068-2-78 | |
| Shock resistance | 18 shocks 15 g , 11 ms all axis, IEC 60068-2-27 | |
| Vibration resistance | 10 ... 150 Hz, +/- 0.075 mm , 1g, 10 cycles per axis according to EN60068-2-6 | |
| Mechanical specifications | ||
| Degree of protection | IP66 ( when mounted on the TCU or PCU from Pepperl+Fuchs ) | |
| Material | ||
| Surface | front: glass (optional with stainless steel bezel) Back side: powder coated aluminum |
|
| Mass | approx. 11 kg | |
| Dimensions | 624 mm x 458 mm x 35 mm | |
| Cut out dimensions | 583 mm x 417 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | BVS 16 ATEX E 081 X | |
| Marking |  II 3G Ex ec IIC T4 Gc II 3D Ex tc IIIC T80 °C Dc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013, EN 60079-7:2015, EN 60079-31:2014 | |
| International approvals | ||
| IECEx approval | IECEx BVS 16.0061X | |
| Approved for | Ex ec IIC T4 Gc Ex tc IIIC T80 °C Dc |
|
| Standards | IEC 60079-0:2011, IEC 60079-7:2015, IEC 60079-31:2013 | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27330201 |
| ECLASS 12.0 | 27330201 |
| ECLASS 11.0 | 27330201 |
| ECLASS 10.0.1 | 27330201 |
| ECLASS 9.0 | 27330201 |
| ECLASS 8.0 | 27339090 |
| ECLASS 5.1 | 27242402 |
| ETIM 9.0 | EC001428 |
| ETIM 8.0 | EC001428 |
| ETIM 7.0 | EC001428 |
| ETIM 6.0 | EC001428 |
| ETIM 5.0 | EC001428 |
| UNSPSC 12.1 | 39121106 |
Details: DPU1200-J2-22F*
Function
The DPU1200-J2-22F* display unit is an ATEX/IECEx certified device intended for use in Zone 2/22 hazardous areas.
Connected to a Pepperl+Fuchs thin client unit or PC unit, the DPU serves as a display with an optional touchscreen. It enables users to perceive the system outputs of the computing unit and to input user data.
Five system keys located on the front of the unit allow users to control system functions of the display unit (e. g., brightness control) and the computing unit (e. g., home key). Integrated signal lights on the front keys show selected failure modes in case of a defective component.
The display unit is optimized for use with the modular HMI components of the VisuNet GXP product line: TCU1200-* thin client unit,
PCU1200-* PC unit, and PSU1200-* power supply unit.
Product Documentation: DPU1200-J2-22F*
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 174 KB | |
| Manuals | |||
| Manual DPU1100-* / DPU1200-* | ENG | 5243 KB | |
Approvals: DPU1200-J2-22F*
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| China SITIIAS CCC Ex Certificate | 2020322309003367 (Singapore) | ALL | 2219 KB | |
| EU DEKRA EXAM ATEX Category 3 D ATEX Category 3 G | BVS 16 ATEX E 081 X | ALL | 19457 KB | |
| IECEx Certificate of Conformity | IECEx BVS 16.0061X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3337D | ALL | 231 KB | |
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3096F | ALL | 242 KB | |
Associated Products: DPU1200-J2-22F*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.