Select Your Country

Go to global website

  1. ja
  2. Products
  3. Industrial Communication and Interfaces
  4. 電源
  5. Industrial Power Supplies
  6. PS1000-A6-24.20.R

PS1000-A6-24.20.R Power Supply

Key Benefits at a Glance

  • 100 V AC to 240 V AC wide-range input
  • Output 24 V DC, 20 A, 480 W, 1-phase
  • Housing width 48 mm
  • Built-in decoupling mosfet for 1+1 and N+1 redundancy
  • Efficiency up to 95.2 %
  • Minimal inrush current surge
  • DC OK relay contact
  • Current sharing for parallel use
  • Suitable for Zone 2/Div. 2 mounting

Show more

Please contact us for exact delivery estimation.
Product photo: Power Supply PS1000-A6-24.20.R
Product photo: Power Supply PS1000-A6-24.20.R
Approval
Product Compliance: USA - cULus
Product Compliance: Europe – CE
Approval
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
  • DE
  • EN
  • ES
  • FR
  • PL
Datasheet機能ClassificationInformative LiteratureProduct DocumentationDesign / Simulation承認

Technical data of PS1000-A6-24.20.R

Efficiency93.8 % at 120 V AC
95.2 % at 230 V AC
Power dissipation31.7 W at 120 V AC
24.2 W at 230 V AC
Voltage range100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %)
110 ... 150 V DC (±20 %)
Current4.28 A at 120 V AC
2.25 A at 230 V AC
4.64 A at 110 V DC
for lower output currents see technical information
Inrush current10 A peak at 120 V AC, temperature independent
4.5 A peak at 230 V AC, temperature independent
Capacity factor0.99 at 120 V AC
0.98 at 230 V AC
Rated voltageUr24 V DC
Voltage range23.8 ... 25.2 V DC
factory setting: 24.1 V
Rated currentIr20 A
Current24 A at ambient temperature < 45 °C (113 °F)
20 A at ambient temperature 60 °C (140 °F)
15 A at ambient temperature 70 °C (158 °F)
linear power derating see technical information
Power480 W
Ripplemax. 100 mV pp
Hold-up time32 ms at 120 V AC
32 ms at 230 V AC
Overload behaviorcontinuous current : output voltage > 13 V DC
intermittent current : output voltage < 13 V DC
Short-circuit currenttyp. 29 A , intermitted current peak value for typ. 2 s
Voltage limitationtyp. 30.5 V DC
max. 32 V DC
Connectionterminals 13, 14
Output typerelay contact DC OK
- contact is closed if the output voltage is > 90 % of the adjusted output voltage
Contact loadingmax. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load
min. 1 mA at 5 V DC
Input/OutputSELV/PELV
Display elementsLED green: status DC OK
- LED lights up if the output voltage is > 90 % of the adjusted output voltage
Electromagnetic compatibility
Directive 2014/30/EUIEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 ,
IEC/EN 61000-3-3
Low voltage
Directive 2014/35/EUEN 61010-1
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000:2019
Degree of protectionEN 60529
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient temperature-40 ... 70 °C (-40 ... 158 °F) , see technical information
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity5 ... 95 %, noncondensing
Shock resistance20 g , 11 ms or 30 g , 6 ms
Vibration resistance2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g
Corrosion resistanceIEC 60068-2-60, Method 4
ISA-71.04, severity level G3
Housing materialaluminum alloy , galvanized steel
Degree of protectionIP20
Connection
Inputplug-in connector with screw terminals
conductor cross section: max. 4 mm2 (AWG 20-12)
cable diameter: max. 2.4 mm, wire end ferrules included
stripped insulation length: 7 mm
tightening torque: max. 0.5 Nm
Outputplug-in connector with screw terminals
conductor cross section: max. 6 mm2 (AWG 24-10)
cable diameter: max. 3.2 mm, wire end ferrules included
stripped insulation length: 12 mm
tightening torque: max. 0.6 Nm
Relay contact outputplug-in connector with screw terminals
conductor cross section: max. 1.5 mm2 (AWG 26-14)
cable diameter: max. 1.8 mm, wire end ferrules included
stripped insulation length: 6 mm
tightening torque: max. 0.8 Nm
Massapprox. 850 g  
Dimensions48 x 124 x 127 mm (W x H x D) , without plugs and without DIN mounting rail
Height124 mm
Width48 mm
Depth127 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
ATEX approval
ATEX certificateEPS 17 ATEX 1 089 X
ATEX markingEx-Hexagon II 3G Ex ec nC II T4 Gc
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010
UL approvalE350173 , E223176
IECEx approval
IECEx certificateIECEx EPS 20.0056X
IECEx markingEx ec nC IIC T4 Gc
StandardsIEC 60079-0:2011 , IEC 60079-7:2015 , IEC 60079-15:2010
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies