Select Your Country
VOS2000-F226-C-S ビジョンセンサ
Key Benefits at a Glance
- フレキシブルな検査作業に対応する幅広い検出ツール
- ビション ツール 機能 : 検出、完全一致チェック、コード読み取り、テキスト認識、位置決め (組み合わせ可能)
- オンボードの 32 ジョブを保存できます
- 交換可能レンズ（C マウント）
- プログラム可能なデータ出力でシステムに容易に統合可能
Show more
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
DE
- DE
- EN
- ZH
DatasheetClassificationInformative LiteratureProduct DocumentationDesign / Simulation承認ソフトウェアRelated Products
Technical data of VOS2000-F226-C-S
| ビジョン センサ 上位モデル ; 解像度 : 1280 x 960 ピクセル ; 光源 : 外部照明 ; レンズ : C マウント接続 |
| Light source | External lighting | |
| Picture detail | dependant of operating distance (see manual) | |
| Trigger mode | Free-running or triggered externally | |
| Depth of focus | ± 5 % of the operating distance | |
| Resolution | 1280 x 960 pixels | |
| Image sensor | 1/3" CMOS monochrom Global Shutter 3.75 µm pixel size |
| Parameter assignment | Parameterization via PC user interface VCT Tool | |||||||||||||
| Evaluation procedure | ||||||||||||||
| ||||||||||||||
| LED 1 | Steady blue: sensor started, not set up Steady green: job loaded, ready for execution Flashing green: job loaded and being executed, capture in progress Steady red: sensor fault | |
| LED 2 | Flashing blue: starting (duration approx. 20 seconds) Steady green: measurement successful (Pass) Steady blue: measurement borderline (Recycle) Steady red: measurement unsuccessful (Fail) | |
| LED 3 | Steady blue: warm reset or restart Steady red/green/yellow: network activity |
| Operating voltage | UB | 12 ... 30 V DC |
| No-load supply current | I0 | 300 mA |
| Interface type | Ethernet | |||||||||||||||||||||||||
| Protocol | PROFINET IO TCP/IP EtherNet/IP | |||||||||||||||||||||||||
| Fieldbus | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| Transfer rate | 100 MBit/s | |||||||||||||||||||||||||
| Interface type | RS-232 , serial | |
| Transfer rate | 115.2 kBit/s |
| Input type | optically decoupled Inputs | |
| Input voltage | Logic low (OFF): 0 ... 3 V Logic high (ON): 11 ... 30 V Switching threshold: 12 V | |
| Control input | Image capture trigger + 2 general purpose inputs 2 inputs can be used for job switching | |
| Input current | 8 mA ( typical ) | |
| Internal protection circuit | 3 kΩ / 4000 V ( rms ) | |
| Switching delay | Switch-on time (ON): 20 µs Switch-off time (OFF): 10 µs Image capture trigger: 62 µs (until image capture is triggered) |
| Output type | 3 general purpose outputs , freely programmable , optically decoupled | |
| Switching voltage | max. 30 V | |
| Switching current | max. 100 mA each output | |
| Switching delay | Switch-on time (ON): 150 µs Switch-off time (OFF): 50 µs |
| Emitted interference | EN 61000-6-4:2007+A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 |
| Approvals | CE |
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP67 (with mounted lens protection cover) | ||||||||||
| Connection | 8-pin M12 socket A-coded ; 12-pin M12 socket | ||||||||||
| Material | |||||||||||
| |||||||||||
| Installation | Mounting bracket | ||||||||||
| Mass | approx. 200 g | ||||||||||
| Objective connection | C-mount connection for external lens with different focal lengths | ||||||||||
| Dimensions | |||||||||||
| |||||||||||