All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
| I/O hub with IO-Link interface |
| LED PWR | LED green: flashing with short break (1 Hz) - IO-Link mode | |
| LED OL | overload of sensor power supply; LED red | |
| LED IO | Switching status/overload (input/output); 8 LED yellow/red yellow: input/output active red: output overload |
| Operating voltage | UB | 18 ... 30 V DC, PELV |
| No-load supply current | I0 | max. 25 mA |
| Operating current | IB | max. 2 A |
| Protection class | III |
| Interface type | IO-Link | |
| IO-Link revision | 1.1 | |
| Device profile | Identification and Diagnosis - I&D | |
| Process data | Inputs 2 Byte - Input signals 8 Bit - diagnosis signals 4 Bit Outputs 2 Byte - Output signals 8 Bit - Special functions 8 Bit | |
| Vendor ID | 1 (0x0001) | |
| Device ID | 984577 (0x0F0601) | |
| Data transfer rate | COM3 (230.4 kbits/s) | |
| Min. cycle time | 1 ms | |
| SIO mode support | no | |
| Compatible master port type | Class A , Class B |
| Number/Type | 8 Inputs for 3-wire sensors (PNP), DC (IO1 ... IO8) | |
| Supply | from IO-Link | |
| Voltage | 18 ... 30 V | |
| Current loading capacity | 400 mA , overload and short-circuit protected | |
| Input current | ≤ 5 mA (limited internally) | |
| Switching point | Type 1 according to IEC 61131-2 |
| Number/Type | 8 electronic outputs, PNP (IO1 … IO8), overload proof and short-circuit proof | |
| Supply | from IO-Link | |
| Voltage | ≥ (UB - 1.5 V) | |
| Current | 200 mA per output |
| Electromagnetic compatibility | |||||
| |||||
| Degree of protection | EN 60529:2000 | |
| Fieldbus standard | EN 61131-9:2013 | |
| Input | EN 61131-2:2007 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006 |
| UL approval | Protection class IP20 is not included in the UL approval. The protection class is tested by Pepperl+Fuchs. |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 85 % non-condensing | |
| Climatic conditions | For indoor use only | |
| Altitude | ≤ 5000 m above MSL | |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks | |
| Vibration resistance | 0.35 mm / 5 g 5 ... 500 Hz | |
| Pollution degree | 2 |
| Degree of protection | IP20 according to EN 60529 | ||||||||||
| Connection | 200 mm, PVC cable 0.5 mm2 | ||||||||||
| Material | |||||||||||
| |||||||||||
| Mass | 33 g | ||||||||||
| Dimensions | |||||||||||
| |||||||||||
| Note | This device is maintenance-free. If the device is used in a manner not specified by the manufaturer, the protection provided by the device may be impaired. | ||||||||||
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
| Categories | Description | Status |
|---|---|---|
| Functional | These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login). | |
| Analytics | We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it. | |
| Marketing | These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content. |
