Select Your Country

Go to global website

  1. ko
  2. Products
  3. Hazardous Area Products and Solutions
  4. Sensors for Hazardous Areas
  5. RFID Read/Write Devices
  6. IPH-30GM-Ex

IPH-30GM-Ex RFID read/write device hazardous area

Key Benefits at a Glance

  • Read/write head with thread M30 x 1.5
  • ATEX-approval for zone 1 and zone 21
  • Degree of protection IP68
  • 15 m connection cable
  • For connection to IDENTControl evaluation unit
  • Encapsulation Ex m

Show more

Please contact us for exact delivery estimation.
Product photo: RFID read/write device hazardous area IPH-30GM-Ex
Dimensions: RFID read/write device hazardous area IPH-30GM-Ex
Product photo: RFID read/write device hazardous area IPH-30GM-Ex
Dimensions: RFID read/write device hazardous area IPH-30GM-Ex
Approval
Product Compliance: Europe – CE
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
  • DE
  • EN
DatasheetClassificationInformative LiteratureProduct DocumentationApprovalsRelated Products

Technical data of IPH-30GM-Ex

LF RFID read/write device for IDENTControl, for hazardous areas
Operating frequency125 kHz
Transfer rate2 kBit/s
MTBF350 a (Operation at +40 °C)
Power consumptionP0≤ 1.2 W
Supplyfrom the IDENTControl
Radio equipment
Directive 2014/53/EUEN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Explosion protectionEN IEC 60079-0
EN 60079-18/A1
Degree of protectionEN 60529
RFIDISO/IEC 18000-2
ATEX approval
MarkingEx-Hexagon II 2G Ex mb IIC T4 Gb
[exsign] II 2D Ex mb IIIC T130°C Db
Equipment protection level GbIBExU 21ATEX1039 X
Equipment protection level DbIBExU 21ATEX1039 X
Ambient temperature-20 ... 70 °C (-4 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Degree of protectionIP68
Connection15 m connecting cable included with delivery
Connection e.g. with terminal boxes Series GL5
Material
HousingStainless steel 1.4305 / AISI 303
Installationflush
Distance between two headsMultiplex on: ≥ 155 mm
Multiplex off: ≥ 350 mm
Massapprox. 2000 g
Dimensions
Length105 mm ± 1 mm
Diameter38 mm
Use in the hazardous areasee instruction manuals
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies