OMD10M-R200-UEP-IO-V1-L Distance sensor

Key Benefits at a Glance

Medium design with versatile mounting options
Space-saving distance sensors in small standardized design
Measuring method PRT (Pulse Ranging Technology)
IO-Link interface for service and process data
Red laser light, laser class 1
Analog output 0 ... 10 V

Product photo: Distance sensor OMD10M-R200-UEP-IO-V1-L

Dimensions: Distance sensor OMD10M-R200-UEP-IO-V1-L

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet Function Classification Informative Literature Product Documentation Design / Simulation Approvals 소포트웨어 Related Products

Technical data of OMD10M-R200-UEP-IO-V1-L

Universal distance sensor, measurement to object, IO-Link interface, measuring method PRT, measuring range up to 10 m, red laser light, laser class 1, push-pull output, analog output, M12 plug

Measuring range

0.03 ... 10 m

Reference target

standard white 90 %, 100 mm x 100 mm

Light source

laser diode

Light type

modulated visible red light

Laser nominal ratings

Note		LASER LIGHT , DO NOT STARE INTO BEAM
Laser class		1
Wave length		660 nm
Beam divergence		2 mrad
Pulse length		4 ns
Repetition rate		300 kHz
max. pulse energy		< 1.3 nJ

Measuring method

Pulse Ranging Technology (PRT)

Max. Motion velocity

10 m/s

Diameter of the light spot

< 20 mm at 10 m

Ambient light limit

50000 Lux @ 2.5m standard white 90 %
10000 Lux @ 2.5m black 6 %

Resolution

1 mm

Temperature influence

< 0.25 mm/K

MTTF_d		> 300 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - switch output active constantly off - switch output inactive
Teach-in indicator		Teach-In : LED yellow/green; equiphase flashing; 2,5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection

Operating voltage	U_B	18 ... 30 V DC
Ripple		10 % within the supply tolerance
No-load supply current	I₀	< 25 mA at 24 V Operating voltage
Protection class		III
Time delay before availability	t_v	< 900 ms

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D Smart Sensor - SSP 4.2.1
Process data		Input 6 Byte - measurement value 4 Byte - scaling factor 8 Bit - signal quality 2 Bit - switching signal 1 1 Bit - switching signal 2 1 Bit - diagnosis signals n Bit - additional signals n Bit Output 2 Bit - sensor control function 1 Bit - evaluation control function 1 Bit
Vendor ID		1 (0x0001)
Device ID		1121027 (0x111B03)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		4 ms
SIO mode support		yes

Switching type		The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link U - Pin2: analog output 0 ... 10 V
Signal output		1 push-pull output , 1 analog output , reverse polarity protected , overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC

Output type

1 current output: 4 ... 20 mA , 12 bit

Load resistor

> 1 kΩ voltage output ; ≤ 470 Ω current output

Recovery time

2 ms

Communication interface		IEC 61131-9 / IO-Link V1.1.3
Laser safety		EN 60825-1:2014

Warm up time		5 min
Measured value output		1 ms
Average data age		3 ms (default), 6 ms , 12 ms , 25 ms , 50 ms , 100 ms , adjustable
Absolute accuracy		typ. ± 20 mm (including influence of temperature)
Repeat accuracy		< 3 mm

UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval		CCC approval / marking not required for products rated ≤36 V
FDA approval		IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.

Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

4-pin, M12 x 1 connector, 90° rotatable

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 37 g

Dimensions

Height		50.6 mm
Width		15 mm
Depth		41.7 mm

Switching output 1		Q1: switching signal high-active , Window mode 6000 ... 9000 mm
Analog output		Window mode (rising ramp) 200 ... 5000 mm

General Notes

Related News and Applications

Read more on news and applications related to this product.

Photoelectric Distance Sensor of the R200 Series with Pulse Ranging Technology

Products and Solutions

2024. 2. 23.

Small But Powerful—Precise Distance Measurement up to 60 m in Particularly Confined Spaces

The new photoelectric distance sensors of the R200 series integrate the powerful Pulse Ranging Technology (PRT) in a compact standard housing—for precise measurement results at distances of up to 60 m.

More information

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Categories	Description	Status
Functional	These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics	We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing	These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.