Solenoid Driver KCD2-SLD-Ex2.1545-Y1

2-channel isolated barrier
24 V DC supply (bus or loop powered)
Output 45 mA at 15 V DC
Line fault transparency (LFT)
Test pulse immunity
Housing width 12.5 mm

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:

Technische gegevens KCD2-SLD-Ex2.1545-Y1

General specifications
Signal type		Digital Output
Supply
Connection		Power Rail or terminals 9+, 10- bus powered
Rated voltage		18 ... 30 V DC
Power dissipation		< 2 W
Power consumption		max. 3.5 W at 45 mA output current
Input
Connection side		control side
Connection		terminals 5+, 6-; 7+, 8- limited electrical values : max. 30 V , max. 5 A
Test pulse length		max. 2 ms from DO card
Signal level		loop powered 1-signal: 18 ... 30 V DC (current limited to ≥ 20 mA) 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 24 V DC (current limited at 5 mA) 0-signal: 0 ... 5 V DC
Rated current		loop powered 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 20 mA (minimum load current DO card) bus powered 1-signal: 5 mA
Inrush current		≤ 200 mA after 100 µs
Output
Connection side		field side
Connection		terminals 1+, 2-; 3+, 4-
Internal resistor		approx. 167 Ω
Current		≤ 45 mA
Voltage		≥ 15 V
Current limit		45 mA
Open loop voltage		min. 23.6 V
Load		nominal 0.05 ... 20 kΩ , valid range for line fault detection (LFD)
Energized/De-energized delay		≤ 20 ms / ≤ 20 ms
Line fault detection
	Test current	max. 350 µA , calculated by I_LFD = 3.3 V / (10 kΩ + R_Load)
Galvanic isolation
Input/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Power supply/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 , EN IEC 61326-1:2021 (industrial locations) , EN IEC 61326-3-2:2018 For further information see system description.
Degree of protection		IEC 60529:2013
Protection against electrical shock		UL 61010-1:2019
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 105 g
Dimensions		12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		UL 23 ATEX 3027 X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia Refer to certificate for alternative parameters.
	Voltage	25.3 V
	Current	52 mA
	Power	850 mW (angular characteristic curve)
	Internal resistance	167 Ω
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Collective error message
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Certificate		UL 23 ATEX 3065 X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
UL approval		E106378
	Control drawing	116-0496 (cULus)
IECEx approval
	IECEx certificate	IECEx ULD 23.0016X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KCD2-SLD-Ex2.1545-Y1

Informative Literature: KCD2-SLD-Ex2.1545-Y1

Literature	Taal	Bestandstype	Bestandsgrootte
Product Overview - KCD* dual channel solenoid driver	ENG	PDF	507 KB

Product Documentation: KCD2-SLD-Ex2.1545-Y1

Product information	Taal	Bestandstype	Bestandsgrootte
Application Guideline Solenoid Drivers	ENG	PDF	734 KB
Safety and Security Documentation
Handleiding	HOL	PDF	167 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KCD2-SLD-Ex2.1545-Y1

CAD	Taal	Bestandstype	Bestandsgrootte
CAD 3-D / CAD 3-D	ALL	STP	3085 KB

Approvals: KCD2-SLD-Ex2.1545-Y1

Certificates	Certificaatnummer	Taal	Bestandstype	Bestandsgrootte
Canada UL cUL Hazardous Location UL E106378	CoC UL-CA-2414398-0 Rep Ref E106378-20240510	ALL	PDF	218 KB
Canada UL cUL Hazardous Location UL E106378	CoC UL-CA-2414399-0 Rep Ref E106378-20240510	ALL	PDF	218 KB
Europe UL ATEX Category (1) D ATEX Category (M1) ATEX Category (1) G	UL 23 ATEX 3027X	ALL	PDF	108 KB
Europe United Kingdom UL ATEX Category 3 G	UL 23 ATEX 3065X	ALL	PDF	83 KB
USA UL UL E106378 Hazardous Location UL	CoC UL-US-2417714-0 Rep Ref E106378-20240510	ALL	PDF	255 KB
USA UL UL E106378 Hazardous Location UL	CoC UL-US-2417718-0 Rep Ref E106378-20240510	ALL	PDF	218 KB
Worldwide UL IECEx Certificate of Conformity	IECEx ULD 23.0016X	ALL	LINK	---
Declaration of Conformity
EU-conformiteitsverklaring	TDOC-7688AHOL	HOL	PDF	147 KB

Aanverwante producten: KCD2-SLD-Ex2.1545-Y1

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KC-ST-5GN Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces greenpa

	KC-ST-5BU Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

Quick Links

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
phone +31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
phone +31 73 75 07 108

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.