2-D LiDAR Sensor OBD60M-R2000-1L-Y70132754

4 freely programmable monitoring fields
4 inputs/outputs (selectable)
High operating range
High angle resolution
360°-angle of measurement
Measuring method PRT (Pulse Ranging Technology)

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:

Technische gegevens OBD60M-R2000-1L-Y70132754

Productbeschrijving
R2000 Detection, 2-D LiDAR sensor for precise field monitoring, measuring range to object up to 60 m

General specifications
Measuring range		0.1 … 20 m (black 10 %) 0.1 … 60 m (white 90 %) 0.1 … 60 m (reflector) Min. reflectivity 1.8 %
Light source		laser diode
Light type		modulated infrared light
Laser nominal ratings
	Note	LASER RADIATION , DO NOT STARE INTO BEAM
	Laser class	1
	Wave length	905 nm
	Beam divergence	transversal 10 mrad , longitudinal 2 mrad
	Pulse length	5 ns
	Repetition rate	54 kHz
	max. pulse energy	< 94 nJ
Measuring method		Pulse Ranging Technology (PRT)
Scan rate		10 Hz, 20 Hz, 30 Hz
Scanning angle		360°
Diameter of the light spot		105 mm x 25 mm at 10 m
Ambient light limit		50000 Lux
Functional safety related parameters
MTTF_d		75 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green
Data flow indicator		LED yellow: active ethernet LED green: Ethernet link
Function indicator		LED red: fault LED yellow: Q1 + Q2
Control elements		2 Button
Parameterization indicator		24 x 252 pixels , red
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		10 % within the supply tolerance
No-load supply current		≤ 400 mA / 24 V DC
Power consumption		< 10 W
Time delay before availability		< 40 s
Integrated application
Application		Field monitoring
Number of fields		4
Response time		30 ms + 1 Scan duration
Detectable object shape		Almost any
Object size		> 1 mm
Linking fields		Up to 4 x 3 levels
Interface
Interface type		4 x switching inputs/outputs (selectable)
Input/Output
Input/output type		4 Inputs/Outputs , Independently configurable , short circuit/reverse polarity protected
Input
Switching threshold		low: Ue < 5 V, high: Ue > 10 V
Output
Switching threshold		low: Ua < 1 V, high: Ua > Ub - 2 V
Switching current		100 mA per output
Conformity
Laser safety		EN 60825-1:2014
Compliance with standards and directives
Standard conformity
	Product standard	IEC 61000-6-2
	Shock and impact resistance	EN 60068-2-6 EN 60068-2-27
Measurement accuracy
Measuring speed		54000 measurements per second
Angle resolution		0,071°; 0,15°; 0,2°
Repeat accuracy		< 12 mm
Approvals and certificates
Protection class		III (operating voltage 50 V)
UL approval		cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-10 ... 50 °C (14 ... 122 °F)
Storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Relative humidity		95 % , no moisture condensation
Mechanical specifications
Degree of protection		IP65
Connection		4-pin, M12x1 connector, standard (supply) , 8-pin, M12x1 connector, A-coded (MultiPort) , 4-pin, M12x1 socket, D-coded (LAN)
Material
	Housing	ABS + PC + Aluminum
	Optical face	PMMA
Mass		approx. 0.8 kg
Dimensions
	Height	116.5 mm
	Width	106 mm
	Length	106 mm

Classifications

System	Classcode
ECLASS 13.0	27270913
ECLASS 12.0	27270913
ECLASS 11.0	27270913
ECLASS 10.0.1	27270913
ECLASS 9.0	27270913
ECLASS 8.0	27270913
ECLASS 5.1	27270801
ETIM 9.0	EC001825
ETIM 8.0	EC001825
ETIM 7.0	EC001825
ETIM 6.0	EC001825
ETIM 5.0	EC001825
UNSPSC 12.1	41111613

Details: OBD60M-R2000-1L-Y70132754

Informative Literature: OBD60M-R2000-1L-Y70132754

Literature	Taal	Bestandstype	Bestandsgrootte
Product Overview - LiDAR Sensors	ENG	PDF	2253 KB
Application Report - 3-D Volume Measurements on Conveyor Belts	ENG	PDF	331 KB
Application Report - Collision Protection for Doorways	ENG	PDF	703 KB
Application Report - Loose Cable Detection in Automotive Industry	ENG	PDF	323 KB
Application Report - Maximum Protection through Reliable Positioning of the Fall Protection System	ENG	PDF	178 KB
Application Report - Precise Broken Pallet Detection in High Bay Warehouses	ENG	PDF	221 KB
Application Report - Precise Orientation for Automated Guided Vehicles	ENG	PDF	388 KB
Application Report - Preventing Collisions from Every Direction	ENG	PDF	246 KB
Application Report - R2000 2-D-LiDAR Sensors for Navigating Automated Guided Vehicles	ENG	PDF	337 KB
Application Report - Reliable Collision Protection in High Bay Warehouses	ENG	PDF	234 KB
Application Report - Safe Positioning of Automated Guided Vehicles	ENG	PDF	298 KB

Product Documentation: OBD60M-R2000-1L-Y70132754

Brief Instructions	Taal	Bestandstype	Bestandsgrootte
Brief Instructions - OBDR2000	ENG	PDF	1550 KB
Manuals
DTM Manual "Device Type Manager R2000" (Software Manual)	ENG	PDF	5396 KB
Manual OBDM-R2000-	ENG	PDF	1709 KB
Software Information
OMDxxx-R2000 Firmware v1.62 release notes / OMDxxx-R2000 Firmware v1.62 Versionshinweise	ALL	PDF	395 KB
R2000 Detection firmware v1.62 release notes / R2000 Detection Firmware v1.62 Versionshinweise	ALL	PDF	344 KB

Design / Simulation: OBD60M-R2000-1L-Y70132754

CAD	Taal	Bestandstype	Bestandsgrootte
CAD 3-D / CAD 3-D	ALL	STP	2250 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: OBD60M-R2000-1L-Y70132754

Certificates	Certificaatnummer	Taal	Bestandstype	Bestandsgrootte
Canada USA UL Ordinary Location	UL-CA-L87056-31-91205102-0 / UL-US-L87056-11-91205102-0	ALL	PDF	545 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0074G	ALL	PDF	308 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5254	ALL	PDF	229 KB

Software: OBD60M-R2000-1L-Y70132754

Device Description Files/Drivers	Vrijgave-informatie	Bestandstype	Bestandsgrootte
DTM / DTM	v1.4.0.1	ZIP	5451 KB
Software Tools
PACTware 5.0 / PACTware 5.0	5.0.5.31	ZIP	44203 KB

Aanverwante producten: OBD60M-R2000-1L-Y70132754

Accessories

	V1SD-G-ABG-PG9 Male connector, field-attachable
	Male connector M12 straight D-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	V1-G-5M-PUR Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa

	V1-G-BK5M-PUR-U Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

	V19-G-5M-PUR-ABG Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa

	Schutzkappe LS610 Zubehoer Mounting aid
	M12 protective cap set (connector + socket) for series LS610 / LS611fa

	Funktionserdung LS610/VDM100 Zubehoer Mounting aid
	Function grounding for LS610 / LS611 / VDM100 seriesfa

	MH-R2000 Mounting aid
	Mounting aid for R2000 series, Quick clamp and adjustment system, Simple and fast mountingfa

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
phone +31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
phone +31 73 75 07 108

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.