Select Your Country

Go to global website

  1. nl-be
  2. Products
  3. Hazardous Area Products and Solutions
  4. Fieldbus Infrastructure
  5. Advanced Diagnostics
  6. KT-MB-DMA

KT-MB-DMA Advanced Diagnostic KitFieldConnex® Fieldbus

Key Benefits at a Glance

  • Comprehensive diagnostics for the fieldbus physical layer
  • Module and motherboard for retrofit of any installation
  • Precise measurements through passive circuits
  • For commissioning, online monitoring and troubleshooting
  • For FOUNDATION Fieldbus H1 and PROFIBUS PA
  • Installation in Zone 2/Class I, Div. 2
  • System state and fault indication via LEDs
  • Display of data in the safety of the control room
  • Full software integration into PCS and PAM possible

Show more

Contact us
Product photo: Advanced Diagnostic Kit KT-MB-DMA
Product photo: Advanced Diagnostic Kit KT-MB-DMA
FieldConnex® interface
FOUNDATION Fieldbus interface
Product Compliance: Europe – CE
Interface
PROFIBUS interface
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
  • DE
  • EN
DatasheetClassificationApprovalsSoftwareRelated Products

Technical data of KT-MB-DMA

Advanced diagnostic kit for retrofitting advanced diagnostics
Design / MountingMotherboard based
Installation in hazardous areaZone 2 / Div. 2
Rated voltageUr19.2 ... 35 V
Rated currentIr110 ... 30 mA
Power dissipationmax. 2 W
Number of segments4
Fieldbus typeFOUNDATION Fieldbus/PROFIBUS PA
LED PRI PWRgreen: on, primary bulk power supply connected
LED SEC PWRgreen: on, secondary bulk power supply connected
LED Seg 1...4yellow: bus activity; red 2 Hz flashing: alarm; red: hardware error
Fault signalVFC alarm 1 A, 50 V DC, normally closed
DIP switchdiagnostic address 1...247, binary coded
Interface typediagnostic bus: RS 485
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Electromagnetic compatibilityNE 21
Degree of protectionIEC 60529
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity< 95 % non-condensing
Shock resistance15 g 11 ms
Vibration resistance1 g , 10 ... 150 Hz
Connection typescrew terminal , pluggable
Core cross section2.5 mm2
Housing materialPolycarbonate
Degree of protectionIP20
Massapprox. 290 g
Dimensions
Height220 mm
Width50 mm
Depth162 mm
MountingDIN rail mounting
FM approval
FM certificateFM 19 US 0015 X and FM 19 CA 0011 X
FM markingAEx/Ex ec IIC T4
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies