Select Your Country

Go to global website

  1. nl-be
  2. Products
  3. Industrial Communication and Interfaces
  4. IO-Link
  5. IO-Link Devices
  6. UC1000-18GS-2EP-IO-V15

UC1000-18GS-2EP-IO-V15 Ultrasonic sensor

Key Benefits at a Glance

  • IO-Link Interface for process data, parameterization and diagnosis
  • Programmable via DTM with PACTWARE
  • Programmable via IrDA (infrared interface)
  • Selectable sound lobe width
  • Synchronization options
  • Enhanced temperature compensation adjustable, stable measuring values already 2 min after switching on
  • 2 Push-pull outputs

Show more

Please contact us for exact delivery estimation.190,19 EUR Net price—your individual price will be shown during checkout process.
Preferred Type
Product photo: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Dimensions: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Connection Assignment: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Connection Assignment: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Product photo: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Dimensions: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Connection Assignment: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Connection Assignment: Ultrasonic sensor UC1000-18GS-2EP-IO-V15
Product Compliance: USA - cULus
Product Compliance: United Kingdom – UKCA
Product Compliance: Europe – CE
IO-Link interface
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
  • DE
  • EN
  • ES
  • FR
DatasheetClassificationProduct DocumentationDesign / SimulationApprovalsSoftwareRelated Products

Technical data of UC1000-18GS-2EP-IO-V15

Single head system
Sensing range70 ... 1000 mm
Adjustment range90 ... 1000 mm
Dead band0 ... 70 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 255 kHz
Response delayminimum : 28 ms
factory setting: 56 ms
Sensor cycle time≥ 14 ms (factory setting) ;
programmable to 60 s
Temperature influencewith temperature compensation: ≤ ± 0.75% of the end value 10 min after switching on the sensor (factory setting)
with enhanced temperature compensation: ≤ ± 0.75% of the end value 2 min after switching on the sensor
without temperature compensation: 0.17 %/K
Non-volatile memoryEEPROM
Write cycles300000
LED greensolid: power on
flashing: standby mode or IO-Link communication
LED yellowsolid: object in evaluation range
flashing: switch point programming, object detected
LED redsolid: error
flashing: switch point programming, object not detected
Operating voltageUB10 ... 30 V DC , ripple 10 %SS
No-load supply currentI0≤ 50 mA
Power consumptionP0≤ 700 mW
Time delay before availabilitytv≤ 300 ms
Interface typeIO-Link (via C/Q = Pin 4)
IO-Link revision1.1
Device profileSmart Sensor Profile 2
Process data width32 bit
Device ID0x300603 (3147267)
Transfer rateCOM2 (38.4 kBit/s)
Min. cycle time3 ms
SIO mode supportyes
Compatible master port typeClass A
Class B (use 3-pole adapter or 3-wire cable)
Interface typeIrDA (infrared interface)
Modepoint-to-point connection
Transfer rate115.2 kBit/s
Maximum communication distance5 cm
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level2.5 V ... UB
Input impedance> 22 kΩ
Output currentcurrent source < 2.5 mA
Pulse length≥ 1 ms with external control, low active
Synchronization frequency
Common mode operation≤ 71 Hz
Multiplex operation≤ 71 Hz / n , n = number of sensors , n ≤ 10
Output type2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
Rated operating currentIe100 mA , short-circuit/overload protected
Switching frequencyfactory setting: 10 Hz
programmable to 23 Hz
Voltage drop≤ 2.5 V
Repeat accuracy≤ ± 0.1 % of full-scale value
Range hysteresis1 % of the adjusted operating range (default settings), programmable , min. 1 mm
Off-state current≤ 100 µA
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
IEC 61131-9:2013
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Connection typeConnector plug M12 x 1 , 5-pin
Degree of protectionIP67
Material
Housingstainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT plastic parts
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Installation positionany position
Mass45 g
Tightening torque, fastening screwsmax. 30 Nm
Dimensions
Length90 mm
Diameter18 mm
Output 1near switch point: 90 mm
far switch point: 1000 mm
output function: Window mode
output behavior: NO contact
Output 2near switch point: 90 mm
far switch point: 500 mm
output function: Window mode
output behavior: NO contact
Beam widthwide
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies