Select Your Country
RD0-TI-Ex8.FF.* Temperature Multi-InputFieldConnex® Fieldbus
Key Benefits at a Glance
- For 8 temperature or analog sensors
- Installation in Zone 1/Div. 1, intrinsically safe
- Sensors in Zone 0/Div. 1
- Connection to fieldbus acc. to FISCO or Entity
- For FOUNDATION Fieldbus H1
- PCS integration via device description and function blocks
- Concentrator method for simplified configuration
- Monitors sensor condition
- For T/C, RTD 2-, 3-, 4-wire, voltage and resistance
- Cold junction compensation
- Removable terminals
Show more
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
DE
- DE
- EN
Technical data of RD0-TI-Ex8.FF.*
| Temperature multi-input, electronic component for control cabinet installation |
| Design / Mounting | Cabinet installation | |
| Installation in hazardous area | Zone 1 / Div. 1 |
| Fieldbus type | FOUNDATION Fieldbus | |
| Physical layer profile | profile type 511 (FISCO), profile type 111 (Entity) | |
| ITK version | 6.2.0 (DEV_REV 02) | |
| Implementation | resource block 1x RS function block 8x AI, 1x MAI transducer block 8x sensor TB, 1x concentrator TB | |
| Execution time | AI, MAI 40 ms max. | |
| Macro cycle | typical for one device 8xAI or 1xMAI max. 500 ms | |
| Firmware update | via separate plug connection | |
| FDE (Fault Disconnect Equipment) | 6.7 mA | |
| Polarity | not polarity sensitive | |
| Rated voltage | UN | 9 ... 32 V |
| Rated current | IN | max. 23 mA |
| LED PWR | green: on, bus voltage existent | |
| LED COM ERR | red, continuous lightning: hardware error; red, flashing: no bus activities or bus fault; off: no error | |
| LED CHANNEL ERROR | red: 2 Hz flashing: lead breakage, overrange; off: no error |
| Number | 8 | |
| Sensor types | see table 1 | |
| Grounding | grounding of thermoelements possible | |
| Error detection | lead breakage, wiring error, hardware device error | |
| Common mode voltage | Input to Input 600 Vpeak |
| Deviation | ||||||||||||||
| ||||||||||||||
| Internal measurement cycle | for all sensor types max. 1 s | |||||||||||||
| Fieldbus/inputs | safe galvanic isolation acc. to EN 60079-11, voltage peak value 375 V |
| Electromagnetic compatibility | |||||
| |||||
| Galvanic isolation | EN 60079-11 | |
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) hazardous area -40 ... 85 °C (-40 ... 185 °F) safe area | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | ≤ 95 % non-condensing | |
| Shock resistance | 15 g , 11 ms | |
| Vibration resistance | 5 g , 10 ... 150 Hz | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Connection type | plug-in terminals , spring terminal and screw terminal | |||||||
| Core cross section | ||||||||
| ||||||||
| Housing material | Polycarbonate | |||||||
| Degree of protection | IP20 | |||||||
| Mass | 360 g | |||||||
| Mounting | DIN rail mounting | |||||||
| EU-type examination certificate | PTB 03 ATEX 2237 | |||||||
| ||||||||
| Bus | FISCO see EC-Type Examination Certificate | |||||||
| Inputs | see EC-Type Examination Certificate | |||||||
| Certificate | PTB 03 ATEX 2238 X | |||||||
| ||||||||
| Galvanic isolation | ||||||||
| ||||||||
| Directive conformity | ||||||||
| ||||||||
II 2 (1) G Ex ia [ia Ga] IIC T4 Gb , [exsign] II (1) G [Ex ia Ga] IIC , [exsign] II (1) D [Ex ia Da] IIIC , [exsign] II 3 G Ex ic IIC T4 Gc| FM approval | ||||||||
| ||||||||
| IECEx approval | ||||||||
| ||||||||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |