Select Your Country

Go to global website

  1. no
  2. Products
  3. Industrial Sensors
  4. Safety for Factory Automation
  5. Performance Level d
  6. NSN20-L2M-2E2-V1-S2D2

NSN20-L2M-2E2-V1-S2D2 Inductive sensor

Key Benefits at a Glance

  • No unusable area
  • 20 mm non-flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • Sensor head bidirectional and rotatable
  • TÜV certified

Show more

In stock1 738,00 NOK Net price—your individual price will be shown during checkout process.
Product photo: Inductive sensor NSN20-L2M-2E2-V1-S2D2
Dimensions: Inductive sensor NSN20-L2M-2E2-V1-S2D2
Connection Assignment: Inductive sensor NSN20-L2M-2E2-V1-S2D2
Product photo: Inductive sensor NSN20-L2M-2E2-V1-S2D2
Dimensions: Inductive sensor NSN20-L2M-2E2-V1-S2D2
Connection Assignment: Inductive sensor NSN20-L2M-2E2-V1-S2D2
Product Compliance: International – TÜV SÜD
Product Compliance: USA - cULus
Product Compliance: United Kingdom – UKCA
Product Compliance: Europe – CE
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

CS
  • CS
  • DE
  • EN
  • ES
  • FR
  • IT
  • PL
  • PT
  • SV
  • ZH
DatasheetClassificationDesign / SimulationApprovalsSoftwareRelated Products

Technical data of NSN20-L2M-2E2-V1-S2D2

Switching function2 x normally open (NO)
Output typePNP
Rated operating distancesn20 mm
Installationnon-flush
Output polarityDC
Assured operating distancesa0 ... 16.2 mm
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
60 mm x 60 mm x 1 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.4
Reduction factor r304 0.85
Reduction factor rBrass 0.5
Output type4-wire
Operating voltageUB18 ... 30 V
Rated operating voltageUe24 V
Switching frequencyf0 ... 10 Hz
HysteresisHtyp. 5%
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Overload resistanceyes
Voltage dropUd≤ 3 V
at IL (sum of all outputs) max. 50 mA
Rated insulation voltageUBIS30 V
Operating currentIL1 ... 30 mA per output
Off-state currentIr0 ... 0.5 mA
No-load supply currentI0≤ 15 mA
Time delay before availabilitytv≤ 300 ms
Switching state indicatorLED, yellow
Error indicatorLED, red
Safety Integrity Level (SIL)SIL 2
Performance level (PL)PL d
CategoryCat. 2
MTTFd> 7500 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)min. 60 %
Assured release distance of a PDDBSar30 mm
Standard conformity
StandardsEN IEC 60947-5-2:2007
EN IEC 60947-5-3:2013
EN ISO 13849-1:2015
EN IEC 61508:2010
EN 62061:2005+AC:2010+A1:2013+A2:2015
compatible with EN ISO 61131-2:2007 Typ 1, 2, 3
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Altitude≤ 2000 m above MSL
Connection typeConnector plug
Housing materialPA-GF35
powder coated metal mounting flange
Sensing facePA-GF35
Degree of protectionIP68 / IP69
Connector
ThreadingM12 x 1
Number of pins4
Mass197 g
Dimensions
Height40 mm
Width40 mm
Length67 mm
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies