Select Your Country

Go to global website

  1. no
  2. Products
  3. Industrial Communication and Interfaces
  4. Power Supplies
  5. Industrial Power Supplies
  6. PS1000-A9-24.40

PS1000-A9-24.40 Power Supply

Key Benefits at a Glance

  • 380 V AC to 480 V AC wide-range inputs
  • Output 24 V DC, 40 A, 960 W, 3-phase
  • Housing width 110 mm
  • Efficiency up to 95.3 %
  • Minimal inrush current surge
  • Shutdown input
  • Remote control for ON/OFF
  • DC OK relay contact
  • Current sharing for parallel use

Show more

Contact us
Product photo: Power Supply PS1000-A9-24.40
Product photo: Power Supply PS1000-A9-24.40
Product Compliance: USA - cULus
Product Compliance: Europe – CE
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
  • DE
  • EN
  • ES
  • FR
  • PL
DatasheetFunctionClassificationInformative LiteratureProduct DocumentationDesign / SimulationApprovals

Technical data of PS1000-A9-24.40

Efficiency95.3 % at 3 x 400 V AC
95.2 % at 3 x 480 V AC
Power dissipation47.3 W at 3 x 400 V AC
48.4 W at 3 x 480 V AC
Voltage range3x 380 ... 480 V AC (-15 %/+20 %), 50 ... 60 Hz (±6 %)
Current1.65 A at 3 x 400 V AC
1.35 A at 3 x 480 V AC
for lower output currents see technical information
Inrush current4.5 A peak at 3 x 400 V AC, temperature-independent
4.5 A peak at 3 x 480 V AC , temperature-independent
Capacity factor0.88 at 3 x 400 V AC
0.9 at 3 x 480 V AC
Remote controlterminals 15, 16
remote control for ON/OFF and shutdown input
Rated voltageUr24 V DC
Voltage range24 ... 28 V DC
factory setting: 24.1 V
Rated currentIr40 A
Currentcontinuous:
40 ... 34.3 A
short-term up to 4 s:
60 ... 51.5 A
linear power derating see technical information
Power960 W
Ripplemax. 100 mV pp
Hold-up time25 ms at 3 x 400 V AC
25 ms at 3 x 480 V AC
Overload behaviorconstant current mode
Short-circuit currenttyp. 46 A continuous, load impedance < 10 mΩ
Voltage limitationtyp. 30.5 V DC
max. 32 V DC
Connectionterminals 13, 14
Output typerelay contact DC OK
- contact is closed if the output voltage is > 90 % of the adjusted output voltage
Contact loadingmax. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load
min. 1 mA at 5 V DC
Input/OutputSELV/PELV
Display elementsLED green: status DC OK
- LED lights up if the output voltage is > 90 % of the adjusted output voltage
LED red: overload
- LED lights up if the output voltage is < 90 % of the adjusted output voltage or in case of short circuit
- flashes if the shutdown has been activated or if the device has shut down due to overtemperature
Control elementspotentiometer , plug-in jumper
Configurationsetting of the output voltage via potentiometer
setting of the operating mode
- plug-in jumper plugged in: "parallel use" operating mode
- plug-in jumper not plugged in: "single use" operating mode
setting of the shutdown input:
- plug-in jumper plugged in: device switches off
Electromagnetic compatibility
Directive 2014/30/EUIEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 ,
IEC/EN 61000-3-3
Low voltage
Directive 2014/35/EUEN 61010-1
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000:2019
Degree of protectionEN 60529
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient temperature-25 ... 70 °C (-13 ... 158 °F) , see technical information
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity5 ... 95 %, noncondensing
Shock resistance15 g , 6 ms or 10 g , 11 ms
Vibration resistance2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 1 g
Housing materialaluminum alloy , galvanized steel
Degree of protectionIP20
Connection
Inputscrew terminals
conductor cross section: max. 6 mm2 (AWG 20-10)
cable diameter: max. 2.8 mm, wire end ferrules included
stripped insulation length: 7 mm
tightening torque: max. 1 Nm
Outputscrew terminals
conductor cross section: max. 16 mm2 (AWG 22-8)
cable diameter: max. 5.2 mm, wire end ferrules included
stripped insulation length: 12 mm
tightening torque: max. 2.3 Nm
Relay contact outputspring terminals
conductor cross section: max. 1.5 mm2 (AWG 24-16)
cable diameter: max. 1.6 mm, wire end ferrules included
stripped insulation length: 7 mm
Remote control/shutdown inputspring terminals
conductor cross section: max. 1.5 mm2 (AWG 24-16)
cable diameter: max. 1.6 mm, wire end ferrules included
stripped insulation length: 7 mm
Massapprox. 1500 g  
Dimensions110 x 124 x 127 mm (W x H x D) , without DIN mounting rail
Height124 mm
Width110 mm
Depth127 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
UL approvalE223176
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Privacy Policy

Deny all cookies