Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
ML9-54-G/25/136/143
| Product Description |
| Retroreflective sensor with polarization filter for clear object detection |
| General specifications |
| Effective detection range | 0 ... 3.5 m in TEACH mode
0 ... 5.7 m in normal mode |
| Reflector distance | 0 ... 3.5 m in TEACH mode
0 ... 5.7 mm in normal mode |
| Threshold detection range | 7.6 m |
| Reference target | H85-2 reflector |
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Polarization filter | yes |
| Angle deviation | max. ± 1° |
| Diameter of the light spot | approx. 40 mm at detection range 1 m |
| Opening angle | 1.7 ° |
| Ambient light limit | 40000 Lux |
| Functional safety related parameters |
| MTTFd | 1050 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | LED yellow: switching state ; Operating reserve ; Teach-In |
| Control elements | Teach-In key |
| Contrast detection levels | 10 % - clean, water filled PET bottles |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , class 2 |
| Ripple | max. 10 % |
| No-load supply current | < 20 mA at 24 V DC |
| Output |
| Switching type | light-on |
| Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Switching frequency | 1000 Hz |
| Response time | 500 µs |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| EAC conformity | TR CU 020/2011 |
| Protection class | II, rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 functional insulation acc. to DIN EN 50178 |
| UL approval | cULus |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | M8 x 1 connector, 4-pin |
| Material | |
| Housing | PC (glass-fiber-reinforced Makrolon) |
| Optical face | glass |
| Connector | plastic |
| Mass | approx. 25 g |
| Dimensions | |
| Height | 38 mm |
| Width | 23 mm |
| Depth | 11 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details:
ML9-54-G/25/136/143
Product Documentation:
ML9-54-G/25/136/143
Design / Simulation:
ML9-54-G/25/136/143
Approvals:
ML9-54-G/25/136/143
Associated Products:
ML9-54-G/25/136/143
| Accessories |
|
|
|
| Female cordset single-ended M8 straight A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
| Female cordset single-ended M8 angled A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
| Female cordset single-ended M8 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M8 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Mounting aid for ML9 series, Mounting bracketfa |
|
|
|
|
| Mounting aid for ML9 series, Threaded bolt M3fa |
|
+46 303 246070