Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
GLV18-55-G/25/102/159
Product Description |
Retroreflective sensor for glass detection, M18 threaded housing design, plastic housing, front optical face, 2.5 m detection range, red light, light on, DC version, NPN output, M12 plug |
General specifications |
Effective detection range | 0 ... 2.5 m in glass mode; 0 ... 5 m in normal mode |
Reflector distance | 0 ... 2.5 m in glass mode; 0 ... 5 m in normal mode |
Threshold detection range | 6.5 m |
Reference target | reflector C110-2 |
Light source | LED |
Light type | modulated visible red light , 640 nm |
Polarization filter | yes |
Diameter of the light spot | approx. 370 mm at 6.5 m ; 50 mm at 1 m |
Opening angle | approx. 2 ° |
Optical face | frontal |
Ambient light limit | 30000 Lux |
Functional safety related parameters |
MTTFd | 1260 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on, blinking with 2 Hz or 4 Hz in Teach-In mode |
Function indicator | LED yellow: In retro-reflective mode: Lights up when light beam is free; flashing if signal is short of operating reserve, is off when light beam is interrupted In glass-mode: Lights up when light beam is free; flashing if further compensation is impossible; off when light beam is interrupted |
Control elements | potentiometer for Teach-In and Mode selection |
Contrast detection levels | 18 % - clear glass bottles
|
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | < 15 mA |
Output |
Switching type | light-on |
Signal output | 1 NPN, short-circuit protected open collector |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Voltage drop | ≤ 1.5 V DC |
Switching frequency | 1 kHz |
Response time | ≤ 0.5 ms |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
EAC conformity | TR CU 020/2011 |
Protection class | II, Rated insulation voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 |
UL approval | cULus Listed, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 3-pin, M12 x 1 connector |
Material | |
| Housing | PC |
| Optical face | PMMA |
| Connector | plastic |
Mass | approx. 10 g |
Dimensions | |
| Length | 43.9 mm |
| Diameter | 18 mm |
| Thread size | M18 |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
GLV18-55-G/25/102/159
Product Documentation:
GLV18-55-G/25/102/159
Design / Simulation:
GLV18-55-G/25/102/159
Approvals:
GLV18-55-G/25/102/159
Associated Products:
GLV18-55-G/25/102/159
Accessories |
|
|
|
Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
Mounting Bracket with swivel nutfa |
|
|
|
|
Plastic mounting adapter, 18 mmfa |
|
|
|
|
Reflector, round ø 84 mm, central mounting holefa |
|
|
|
|
Reflector, rectangular 40.3 mm x 59.9 mm, mounting holesfa |
|
|
|
|
Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa |
|
|
|
|
Female cordset single-ended M12 straight A-coded, 3-pin, PUR cable greyfa |
|