Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
OBR2000-R2-E2-L
Product Description |
Laser retroreflective sensor, ultra-small design with M2 mounting, polarization filter, 2000 mm detection range, PNP output, 2 m fixed cable |
General specifications |
Effective detection range | 0 ... 2 m |
Reflector distance | 40 ... 2000 mm |
Threshold detection range | 2.3 m |
Reference target | H40 reflector |
Light source | laser diode |
Light type | modulated visible red light , 680 nm |
Polarization filter | yes |
Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 680 nm |
| Beam divergence | > 5 mrad |
| Pulse length | approx. 3 µs |
| Repetition rate | approx. 16.6 kHz |
| max. pulse energy | 8 nJ |
Diameter of the light spot | approx. 35 mm at a distance of 2000 mm |
Opening angle | approx. 0.5 ° |
Optical face | frontal |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
Functional safety related parameters |
MTTFd | 800 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted |
Electrical specifications |
Operating voltage | 12 ... 24 V |
No-load supply current | < 10 mA |
Protection class | III |
Output |
Switching type | NO contact |
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Switching voltage | max. 30 V DC |
Switching current | max. 50 mA , resistive load |
Voltage drop | ≤ 1.5 V DC |
Switching frequency | approx. 2 kHz |
Response time | 250 µs |
Conformity |
Product standard | EN 60947-5-2 |
Laser safety | EN 60825-1:2007 |
Approvals and certificates |
EAC conformity | TR CU 020/2011 |
UL approval | E87056 , cULus Recognized, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 2 m fixed cable |
Material | |
| Housing | PC/ABS and TPU |
| Optical face | glass |
| Cable | PUR |
Installation | Fixing screws , 2 x M2 allen head screws included with delivery |
Mass | approx. 20 g |
Dimensions | |
| Height | 24 mm |
| Width | 7.5 mm |
| Depth | 11.2 mm |
Cable length | 2 m |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
OBR2000-R2-E2-L
Product Documentation:
OBR2000-R2-E2-L
Design / Simulation:
OBR2000-R2-E2-L
Approvals:
OBR2000-R2-E2-L
Associated Products:
OBR2000-R2-E2-L
Accessories |
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Reflector, rectangular 47.5 mm x 23.5 mm, mounting holes, fixing strapfa |
|
|
|
|
Reflector with mounting holesfa |
|
|
|
|
Reflector with Micro-structure, rectangular 32 mm x 20 mm, mounting holesfa |
|
|
|
|
Reflector with Micro-structure, rectangular 23 mm x 13.8 mm, diagonal mounting holefa |
|