Solenoid Driver KCD0-SD3-Ex1.1245.SP

1-channel isolated barrier
24 V DC supply (loop powered)
Current limit 45 mA at 12 V DC
Test pulse immunity
Housing width 12.5 mm
Connection via spring terminals with push-in connection technology
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::

Utdrag ur datablad: Tekniska data för KCD0-SD3-Ex1.1245.SP

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Rated voltage		loop powered
Power dissipation		< 1.3 W
Input
Connection side		control side
Connection		terminals 5+, 6-
Test pulse length		max. 2 ms from DO card
Signal level		1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC
Rated voltage		19 ... 30 V DC
Rated current		0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card)
Inrush current		≤ 200 mA after 100 µs
Output
Connection side		field side
Connection		terminals 1+, 2-
Internal resistor		approx. 240 Ω
Current		typ. 45 mA
Voltage		≥ 12 V
Current limit		45 mA
Open loop voltage		typ. 24.6 V
Switching frequency		max. 10 Hz
Energized/De-energized delay		28 ms / 10 ms
Galvanic isolation
Output/other circuits		basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Indicators/settings
Display elements		LED
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 , EN 61326-3-2:2008 For further information see system description.
Degree of protection		IEC 60529:2013
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		spring terminals
Mass		approx. 150 g
Dimensions		12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
	Height	119 mm
	Width	12.5 mm
	Depth	114 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		EXA 17 ATEX 0002 X
	Marking	II 3(1)G Ex ec [ia Ga] IIC T4 Gc II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia
	Voltage	26 V
	Current	110 mA
	Power	715 mW
Input
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval		E106378
	Control drawing	116-0448 (cULus)
IECEx approval
	IECEx certificate	IECEx EXA 17.0001X
	IECEx marking	Ex ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KCD0-SD3-Ex1.1245.SP

Informative Literature: KCD0-SD3-Ex1.1245.SP

Literature	Language	File Type	File Size
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KCD0-SD3-Ex1.1245.SP

Product information	Language	File Type	File Size
Application Guideline Solenoid Drivers	ENG	PDF	734 KB
Safety and Security Documentation
Manual	SWE	PDF	162 KB
Functional Safety Manual	ENG	PDF	420 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KCD0-SD3-Ex1.1245.SP

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	3049 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	2052 KB

Approvals: KCD0-SD3-Ex1.1245.SP

Certificates	Cert No.	Language	File Type	File Size
Australia New Zealand Test Safe	ANZEx 24.3002X	ALL	PDF	196 KB
Brasil TUV Rheinland Brazil	TÜV 21.1182 X	ALL	PDF	1240 KB
China SITIIAS CCC Ex Certificate	2021322316003612 (Singapore)	ALL	PDF	1300 KB
DNV Marine	TAA00001WX	ALL	PDF	106 KB
EXA IECEx Certificate of Conformity	IECEx EXA 17.0001X	ALL	LINK	---
Europe EXA ATEX Category (1) D ATEX ATEX Category (M1) ATEX Category (1) G ATEX Category 3 G	EXA 17 ATEX 0002X	ALL	PDF	2278 KB
Japan CML	CML 23JPN2001X	ALL	PDF	276 KB
Korea KOSHA	23-AV4BO-0173X	ALL	PDF	691 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC E106378 RepRef E106378-20181130	ALL	PDF	414 KB
United Arab Emirates SGS Gulf Limited ECASEx	23-12-96799/E23-12-099897/NB0002	ALL	PDF	603 KB
United Kingdom CML UKEX Category (1) D UKEX Category (M1) UK-Type Examination Certificate UKEX Category 3 (1) G	CML 21UKEX2891X	ALL	PDF	308 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3545C	ALL	PDF	88 KB

Associated Products: KCD0-SD3-Ex1.1245.SP

Matching System Components

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

Accessories

	KC-CTT-3GN2BU Terminal Block with Test Plug Socket
	2-pin spring terminal with push-in connection technology, For KC modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 3 pieces green, 2 pieces bluepa

	KC-CTT-5BU Terminal Block with Test Plug Socket
	2-pin spring terminal with push-in connection technology, For KC modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces bluepa

	KC-CTT-5GN Terminal Block with Test Plug Socket
	2-pin spring terminal with push-in connection technology, For KC modules of K-System, Integrated test sockets for connection of HART communicators, Packaging unit: 5 pieces greenpa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Allmänna kommentarer om produktinformationen från Pepperl+Fuchs

Länkar

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
phone +46 303 246070

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.