General specifications |
Signal type | Analog input |
Supply |
Connection | terminals 14, 15 |
Rated voltage | 19 ... 90 V DC / 48 ... 253 V AC |
Rated current | ≤ 110 mA DC / ≤ 75 mA AC |
Power dissipation | 1.3 W |
Power consumption | 2.1 W |
Input |
Connection side | field side |
Input I | |
| Connection | terminals 1+, 2-, 3 |
| Input signal | 0/4 ... 20 mA |
| Rated current | 22 mA |
| Available voltage | > 15 V at 20 mA , terminals 1+, 3- |
| Open circuit voltage/short-circuit current | 21 V / 26 mA , terminals 1+, 3- terminals 1+, 2- not short-circuit protected |
| Input resistance | < 55 Ω , terminals 2-, 3+ |
Input II | |
| Connection | terminals 5-, 6+ |
| Input signal | 0/2 ... 10 V |
| Input resistance | > 1 MΩ |
Output |
Connection side | control side |
Output I | current output |
| Connection | source: terminals 7(-), 8(+) sink: terminals 7(+), 9(-) |
| Output signal | 0/4 ... 20 mA |
| Source | load 0 ... 750 Ω open circuit voltage < 21 V |
| Sink | voltage across terminals 5 ... 30 V |
Output II | voltage output |
| Connection | terminals 10-, 11+ |
| Output signal | 0/2 ... 10 V |
| Load | min. 10 kΩ |
Transfer characteristics |
Deviation | |
| Resolution/accuracy | S1 in position I: 7 µA/40 µA (0.2 %) S1 in position II: 3.5 mV/20 mV (0.2 %) |
| Influence of ambient temperature | 0.01 % / K of output signal range |
Reaction time | 150 ms |
Galvanic isolation |
Input/Output | functional insulation acc. to IEC 62103, rated insulation voltage 100 Vrms |
Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Indicators/settings |
Display elements | LED |
Control elements | DIP switch rotary switch |
Configuration | via DIP switches via rotary switch |
Labeling | space for labeling at the front |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
Conformity |
Electromagnetic compatibility | NE 21:2006 |
Degree of protection | IEC 60529:1989+A1:1999+A2:2013 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 150 g |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Height | 119 mm |
| Width | 20 mm |
| Depth | 115 mm |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |