Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
KFD0-CC-1
| General specifications |
| Signal type | Analog input |
| Supply |
| Rated voltage | 12 ... 35 V DC loop powered |
| Power dissipation | 0.4 W |
| Input |
| Connection side | field side |
| Connection | terminals 1+, 2- |
| Current range | 0 ... 20 mA , load ≤ 50 Ω |
| Voltage range | 0 ... 10 V , load ≥ 100 kΩ |
| Output |
| Connection side | control side |
| Connection | terminals 9+, 8- |
| Load | (U -12 V) / 0.02 A |
| Current output | 4 ... 20 mA , limited to ≤ 35 mA |
| Fault signal | downscaling ≤ 3 mA |
| Transfer characteristics |
| Deviation | |
| After calibration | 0.1 % of full-scale value |
| Temperature effect | span: 0.050 % of span /K ; zero point: 0.060 % of span /K |
| Linearization | ≤ 0.04 % of full-scale value |
| Influence of supply voltage | 6.5 ppm/V |
| Rise time | 250 ms |
| Galvanic isolation |
| Input/Output | safe isolation according to EN 50178, rated insulation voltage 253 Veff |
| Indicators/settings |
| Control elements | DIP switch
potentiometer |
| Configuration | via DIP switches
via potentiometer |
| Labeling | space for labeling at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
| Insulation coordination | EN 50178 |
| Galvanic isolation | EN 50178 |
| Degree of protection | IEC 60529 |
| Ambient conditions |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Height | 107 mm |
| Width | 20 mm |
| Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| General information |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27210107 |
| ECLASS 12.0 | 27210107 |
| ECLASS 11.0 | 27210107 |
| ECLASS 10.0.1 | 27210107 |
| ECLASS 9.0 | 27210107 |
| ECLASS 8.0 | 27210107 |
| ECLASS 5.1 | 27210107 |
| ETIM 9.0 | EC002475 |
| ETIM 8.0 | EC002475 |
| ETIM 7.0 | EC002475 |
| ETIM 6.0 | EC002475 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details:
KFD0-CC-1
Product Documentation:
KFD0-CC-1
| Safety and Security Documentation | Language | File Type | File Size |
| Manual | SWE | PDF | 53 KB
|
| Manuals |
| System Manual | ENG | PDF | 3694 KB
|
Design / Simulation:
KFD0-CC-1
Associated Products:
KFD0-CC-1
| Matching System Components |
|
|
|
| Cable trunking is integrated in the mounting profile, Safe spacious separation of field and control signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa |
|
| Accessories |
|
|
|
| 3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa |
|
|
|
|
| Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa |
|
+46 303 246070