Serviceline Industrial Sensors
Serviceline Explosion Protection
Singleturn sin/cos rotary encoder ENA58PL-H12DS5-0013SS2-RAA
- Industrial standard housing ∅58 mm
- Suitable for SIL2/Pld applications
- Absolute value data from SSI interface
- 13 Bit singleturn
- Incremental signals from sin/cos output
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för ENA58PL-H12DS5-0013SS2-RAA
| General specifications | ||
|---|---|---|
| Detection type | photoelectric sampling | |
| Device type | Singleturn absolute rotary encoder with incremental output (sin/cos) | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Performance level (PL) | PL d | |
| MTTFd | 1000 a | |
| Mission Time (TM) | 20 a | |
| PFHd | 4.6 E-10 | |
| L10 | 70 E+9 at 1.5 rpm | |
| Diagnostic Coverage (DC) | 99.7 % | |
| Electrical specifications | ||
| Operating voltage | 24 V DC ± 25 % | |
| No-load supply current | max. 100 mA | |
| Time delay before availability | < 250 ms | |
| Output code | Gray code | |
| Code course (counting direction) | cw ascending (clockwise rotation, code course ascending) | |
| Interface | ||
| Interface type | SSI + incremental track (sin/cos) | |
| Monoflop time | ≤ 15 µs | |
| Resolution | ||
| Single turn | 13 Bit | |
| Overall resolution | 13 Bit | |
| Transfer rate | max. 500 kBit/s | |
| Standard conformity | RS 422 | |
| Input 1 | ||
| Input type | Selection of counting direction (cw/ccw) | |
| Signal voltage | ||
| High | 4.5 ... 24 V | |
| Low | 0 ... 2 V | |
| Input current | < 6 mA | |
| Switch-on delay | < 20 ms | |
| Input 2 | ||
| Input type | zero-set (PRESET 1) | |
| Signal voltage | ||
| High | 4.5 ... 24 V | |
| Low | 0 ... 2 V | |
| Input current | < 6 mA | |
| Signal duration | min. 10 ms | |
| Switch-on delay | < 20 ms | |
| Output | ||
| Output type | sine / cosine | |
| Pulses | 2048 | |
| Amplitude | 1 Vss ± 10 % | |
| Load current | max. per channel 10 mA , conditionally short-circuit proof (not with Ub), reverse polarity protected | |
| Output frequency | max. 200 kHz (3 dB limit) | |
| Connection | ||
| Connector | type 9416L (M23), 12-pin | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP65 | |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Salt spray test | DIN EN 60068-2-52 , 672 h | |
| Emitted interference | EN IEC 61000-6-4:2019 | |
| Noise immunity | EN IEC 61000-6-2:2019 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
| Functional safety | IEC/EN 61508:2010 EN 62061/A2:2015 EN 61326-3-1:2008 EN 61800-5-2:2016 Suitable up to SIL 2, PL d, see leaflet. |
|
| Approvals and certificates | ||
| TÜV approval | Cert. no. Z10 17 03 68273 002 | |
| Ambient conditions | ||
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Material | ||
| Housing | 3.2315 aluminum | |
| Flange | 3.2315 aluminum | |
| Shaft | Stainless steel 1.4404 / AISI 316L | |
| Mass | approx. 220 g | |
| Rotational speed | max. 10 min -1 | |
| Moment of inertia | ≤ 80 gcm2 | |
| Starting torque | < 10 Ncm | |
| Shaft load | ||
| Radial offset | max. 0.04 mm | |
| Dimensions | ||
| Length | 52 mm | |
| Diameter | 58 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270502 |
| ECLASS 12.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 10.0.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 5.1 | 27270502 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details: ENA58PL-H12DS5-0013SS2-RAA
Product Documentation: ENA58PL-H12DS5-0013SS2-RAA
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 1306 KB | |
| Safety and Security Documentation | |||
| Manual | SWE | 145 KB | |
Approvals: ENA58PL-H12DS5-0013SS2-RAA
| Declaration of Conformity | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3264 | ALL | 49 KB |
Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
+46 303 246070
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.