Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
OBD450-18GK40A-E2-V1
| Product Description |
| Diffuse mode sensor |
| General specifications |
| Detection range | 0 ... 450 mm |
| Detection range min. | 0 ... 30 mm |
| Detection range max. | 0 ... 450 mm |
| Adjustment range | 30 ... 450 mm |
| Reference target | standard white 200 mm X 200 mm |
| Light source | LED |
| Light type | modulated visible red light |
| Diameter of the light spot | approx. 30 mm at 450 mm |
| Opening angle | approx. 2.6 ° |
| Optical face | lateral |
| Ambient light limit | EN 60947-5-2 20000 Lux |
| Hysteresis | < 15 % |
| Functional safety related parameters |
| MTTFd | 1289 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green:
on - power on
flashing (4 Hz) - short circuit |
| Function indicator | LED yellow:
constantly on - object detected
constantly off - object not detected |
| Control elements | sensitivity adjustment |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA |
| Protection class | III |
| Output |
| Switching type | Q - Pin4: PNP normally open / light-on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | 500 Hz |
| Response time | ≤ 1 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient conditions |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 3-pin, M12 x 1 connector |
| Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Connector | plastic |
| Mass | approx. 9 g |
| Dimensions | |
| Length | 58.5 mm |
| Diameter | 18 mm |
| Thread size | M18 |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC001821 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
OBD450-18GK40A-E2-V1
Design / Simulation:
OBD450-18GK40A-E2-V1
Approvals:
OBD450-18GK40A-E2-V1
Associated Products:
OBD450-18GK40A-E2-V1
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
| Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Plastic mounting adapter, 18 mmfa |
|
|
|
|
| Mounting Bracket with swivel nutfa |
|
+46 303 246070