Serviceline Industrial Sensors
Serviceline Explosion Protection
RFID read/write device IQT1-F61-IO-V1
- Operating frequency 13.56 MHz
- IO-Link interface
- Conforms to ISO 15693
- Suitable for FRAM transponder
- LEDs as function indicators
- Particularly flat construction
- Connection cable with V1 plug (M12 x 1)
- Degree of protection IP67
- Can be mounted on metal
- For connection to IO-Link master
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för IQT1-F61-IO-V1
| Product Description |
|---|
| HF RFID read/write device with IO-Link in accordance with ISO 15693 |
| General specifications | ||
|---|---|---|
| Operating frequency | 13.56 MHz | |
| Transfer rate | 26 kBit/s | |
| Sensing range | ||
| Read distance | 0 ... 55 mm | |
| Write distance | 0 ... 55 mm | |
| Width | max. 45 mm | |
| MTBF | 140 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED green | Illuminated: power on Flashing: IO-Link communication |
|
| LED yellow | Data carrier detected | |
| LED red | Flashing: IO-Link communication interrupted | |
| LED blue | Write/read attempt is being performed | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS | |
| No-load supply current | ≤ 70 mA (at 24 V DC) | |
| Power consumption | ≤ 2 W | |
| Interface | ||
| Interface type | IO-Link | |
| IO-Link revision | 1.1 | |
| Process data | Input 32 Byte Output 32 Byte |
|
| Vendor ID | 1 (0x0001) | |
| Device ID | 4194561 (0x400101) | |
| Data transfer rate | COM3 (230.4 kbits/s) | |
| Min. cycle time | 4 ms | |
| SIO mode support | no | |
| Compatible master port type | Class A Class B |
|
| Directive conformity | ||
| Radio equipment | ||
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.2 | |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
|
| Approvals and certificates | ||
| UL approval | E87056 cULus Listed, Class 2 Power Source, Type 1 enclosure |
|
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
|
| KCC approval | R-R-PF1-IQT1-F61-IO-V1 | |
| MIC approval | AC-21097 | |
| Radio approval | USA: FCC IREIQT1F61IO Canada: IC 7037A-IQT1F61IO |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PBT | |
| Encapsulation compound | WEVO 403FL/300 | |
| Installation | ||
| Distance between two heads | ≥ 150 mm |
|
| Mass | approx. 60 g | |
| Dimensions | ||
| Height | 12 mm | |
| Width | 28 mm | |
| Length | 80 mm | |
| Cable length | 20 cm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IQT1-F61-IO-V1
Informative Literature: IQT1-F61-IO-V1
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB |
Product Documentation: IQT1-F61-IO-V1
| Product information | Language | File Type | File Size |
|---|---|---|---|
| Installation and user instructions for offline parameterization of IO-Link sensors | ENG | 1788 KB | |
| Manuals | |||
| Manual | ENG | 2227 KB | |
Design / Simulation: IQT1-F61-IO-V1
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 201 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: IQT1-F61-IO-V1
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada Radio Approval | 7037A-IQT1F61IO | ALL | 1829 KB | |
| Canada, USA UL | CoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0 | ALL | 561 KB | |
| IO-Link Manufacturer Declaration | CERT-4469 | ALL | 160 KB | |
| Japan Radio Approval | CERT-6239 | ALL | 216 KB | |
| Korea Radio Approval | R-R-PF1-IQT1-F61-IO-V1 | ALL | 279 KB | |
| USA FCC Approval | IREIQT1F61IO | ALL | 127 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3819B | ALL | 110 KB | |
| Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung | ALL | 61 KB | ||
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7036 | ALL | 108 KB | |
Software: IQT1-F61-IO-V1
Associated Products: IQT1-F61-IO-V1
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Kit | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Connect your factory floor sensors to the cloud and start your digital transformation with the new IIoT starter kits.
Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
+46 303 246070
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.