Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
ML29-P/25/103/115b-2m
| Product Description |
| Single-beam miniature sensor, ideal for installing in frames or door profiles |
| System components |
| Emitter | ML29-T/115b-2m |
| Receiver | ML29-R/25/103/115b-2m |
| General specifications |
| Effective detection range | 0 ... 6 m |
| Threshold detection range | 8.5 m |
| Light source | IRED |
| Light type | modulated infrared light |
| Opening angle | +/- 8 ° |
| Optical face | lateral |
| Ambient light limit | 40000 Lux |
| Functional safety related parameters |
| MTTFd | 880 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function indicator | LED red in receiver : lights up when receiving the light beam |
| Electrical specifications |
| Operating voltage | 11 ... 30 V DC |
| No-load supply current | Emitter: ≤ 25 mA
Receiver: ≤ 10 mA |
| Input |
| Test input | Test: Transmitter switches off at +UB ≤ 5 V DC |
| Output |
| Switching type | light-on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 0.1 A |
| Switching frequency | 100 Hz |
| Response time | 5 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN 61000-6-2, EN 61000-6-3 |
| Approvals and certificates |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) |
| Relative humidity | 90 % , noncondensing |
| Mechanical specifications |
| Degree of protection | IP65 |
| Connection | 2 m fixed cable with 4-pin, M12 x 1 connector |
| Material | |
| Housing | PMMA , black |
| Optical face | Plastic pane |
| Mass | per device 12 g |
| Dimensions | |
| Height | 85.2 mm |
| Width | 11.6 mm |
| Depth | 9.2 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details:
ML29-P/25/103/115b-2m
Product Documentation:
ML29-P/25/103/115b-2m
Design / Simulation:
ML29-P/25/103/115b-2m
Approvals:
ML29-P/25/103/115b-2m
Associated Products:
ML29-P/25/103/115b-2m
| Accessories |
|
|
|
| Front plate for thru-beam sensors in series ML29 fa |
|
+46 303 246070