Thru-beam sensor VS18/VSE18-M-LAS/32/40a/76a/82
- M18 threaded housing made of brass, nickel plated
- Detection of very small parts in the near range
- Visible red light, pulsed LASER light
- Focusable optical system
- Array control panel with highly visible LED display
- Flashing power on LED in case of short-circuit
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för VS18/VSE18-M-LAS/32/40a/76a/82
| Product Description |
|---|
| Laser thru-beam sensor |
| System components | ||
|---|---|---|
| Emitter | VS18-M-LAS/76a/118 | |
| Receiver | VSE18-M-LAS/32/40a/82b/118 | |
| General specifications | ||
| Effective detection range | 0 ... 60 m | |
| Threshold detection range | 85 m | |
| Light source | laser diode | |
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | 655 nm | |
| Beam divergence | 11.7 mrad | |
| Pulse length | 2 µs | |
| Repetition rate | 50 kHz | |
| max. pulse energy | 2.55 nJ | |
| Diameter of the light spot | 100 mm x 100 mm at a distance of 85 m | |
| Opening angle | adjustable focal point | |
| Optical face | frontal | |
| Ambient light limit | 30000 Lux | |
| Hysteresis | < 15 % | |
| Functional safety related parameters | ||
| MTTFd | 520 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 90 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, flashes in case of short-circuit | |
| Function indicator | LED yellow, light with free light beam , flashes when falling short of the operating reserve , OFF when light beam is interrupted (in receiver) | |
| Control elements | Sensitivity adjuster, light/dark switch (receiver) | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , class 2 | |
| No-load supply current | Emitter: 20 mA , Receiver: 15 mA | |
| Protection class | II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| Input | ||
| Test input | emitter deactivation at +UB | |
| Output | ||
| Stability alarm output | 1 PNP, inactive when falling short of the stability control , max. 100 mA | |
| Switching type | light/dark on, switchable | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | 30 V DC | |
| Switching current | max. 200 mA | |
| Voltage drop | ≤ 2.5 V DC | |
| Switching frequency | 5000 Hz | |
| Response time | 100 µs | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 55 °C (-13 ... 131 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Shock resistance | b < 30 g, T < 11 ms | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | brass, nickel-plated | |
| Optical face | plastic | |
| Mass | 60 g (device) | |
| Dimensions | ||
| Length | 65 mm | |
| Diameter | 18 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: VS18/VSE18-M-LAS/32/40a/76a/82
Product Documentation: VS18/VSE18-M-LAS/32/40a/76a/82
| Product information | Language | File Type | File Size |
|---|---|---|---|
| Technical information / Technische Information | ALL | 309 KB | |
| Brief Instructions | |||
| Instruction leaflet / Beipackzettel | ALL | 755 KB | |
Design / Simulation: VS18/VSE18-M-LAS/32/40a/76a/82
| CAD | Language | File Type | File Size |
|---|---|---|---|
| 3-D model emitter / 3-D-Modell Sender | ALL | STP | 85 KB |
| 3-D model receiver / 3-D-Modell Empfänger | ALL | STP | 70 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VS18/VSE18-M-LAS/32/40a/76a/82
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-L87056-11-01805002-1 / UL-CA-L87056-31-01805002-1 | ALL | 502 KB | |
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0537C | ALL | 309 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5342 | ALL | 229 KB | |
Associated Products: VS18/VSE18-M-LAS/32/40a/76a/82
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
För första gången finns ett konsekvent utbud av produkter med fotoelektriska funktionsprinciper och innovativa tekniker i identiska kapslingar. Användarna kommer att uppskatta detta enhetliga driftskoncept genom hela sortimentet. Upptäck serierna R100, R101, R103, R200 och R201 …
Oavsett om det gäller glas, solcellsskivor eller kretskort: De fotoelektriska sensorerna i ML100-serien är exakt skräddarsydda för att uppfylla kraven för olika komplexa detekteringsuppgifter. Läs mer om sortimentet …
Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
+46 303 246070
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.