工業感測器服務資訊
+886 2 27227708
+886-2-27227782
防爆產品服務資訊

RFID read/write device IQH1-F198-V1

IQH1-F198-V1
  • Operating frequency 13.56 MHz
  • Conforms to ISO 15693
  • Suitable for FRAM transponder
  • Particularly flat construction
  • Connection cable with V1 plug (M12 x 1)
  • Degree of protection IP67
  • For connection to IDENTControl evaluation unit

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:


產品規格摘要：的技術資料  IQH1-F198-V1

產品描述
HF RFID read/write device, ISO 15693, for IDENTControl
General specifications
Operating frequency13.56 MHz
Transfer rate26 kBit/s
Sensing range
Read distance0 ... 150 mm
Write distance0 ... 150 mm
Widthmax. 145 mm
UL File NumberE87056
MTBF365 a (Operation at +40 °C)
Indicators/operating means
LED green/yellowgreen: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Electrical specifications
Power consumption≤ 1.3 W
Supplyfrom the IDENTControl
Directive conformity
Radio equipment
Directive 2014/53/EUEN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Standard conformity
Degree of protectionEN 60529
RFIDISO/IEC 15693-2
ISO/IEC 15693-3
ISO/IEC 18000-3
Approvals and certificates
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
MIC approvalAC-21096
Radio approvalUSA: FCC IREIQH1F198V1
Canada: IC 7037A-IQH1F198V1
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67
Connectionconnector M12 x 1
Material
HousingPA 6.6
Encapsulation compoundWEVO 403FL/300
Installation
Distance between two headsMultiplex on: ≥ 100 mm
Multiplex off: ≥ 150 mm
Massapprox. 200 g
Dimensions
Height12 mm
Width175 mm
Length190.5 mm
Cable length20 cm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IQH1-F198-V1

Informative Literature: IQH1-F198-V1

Language Selection:
Literature語言檔案類型檔案尺寸
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB
Application Report - Tracking Materials on SpoolsENGPDF1298 KB

Design / Simulation: IQH1-F198-V1

Language Selection:
CAD語言檔案類型檔案尺寸
CAD 3-D / CAD 3-DALLSTP2049 KB
CAD Portal / CAD PortalALLLINK---

Approvals: IQH1-F198-V1

Language Selection:
Certificates證書號碼語言檔案類型檔案尺寸
Canada Radio Approval7037A-IQH1F198V1ALLPDF1829 KB
Canada, USA ULCoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0ALLPDF561 KB
Japan Radio ApprovalCERT-6239ALLPDF216 KB
USA FCC ApprovalIREIQH1F198V1ALLPDF127 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2620CALLPDF109 KB
Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung   ALLPDF61 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-7040ALLPDF107 KB
Australia Radio ApprovalCERT-4490ALLPDF60 KB

相關產品: IQH1-F198-V1

Accessories
Control interface unit IDENTControl with PROFIBUS DP interfacefa
IDENTControl control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa
Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485fa
IDENTControl Compact RFID evaluation unit with interface for PROFIBUS DPfa
IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa
IDENTControl Compact RFID evaluation unit with EtherCAT interfacefa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
Data carrierfa
General Notes Relating to Pepperl+Fuchs Product Information
前往

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市 臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

© 2024 版權所有

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證