请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
TOPSCAN2-8-HS-2500-1/L330/38a
| 產品描述 |
| Single or multi-beam light curtain for individual protection |
| General specifications |
| Detection range min. | 0 ... 1500 mm by background evaluation,
500 ... 1500 mm by background suppression |
| Detection range max. | 0 ... 2500 mm with background evaluation,
500 ... 2500 mm with background suppression |
| Light source | IRED |
| Black-white difference (6 %/90 %) | < 20 % at 2000 mm sensor range |
| Marking | CE |
| Number of beams | 1 (number of built-in sensor modules AIR) |
| Operating mode | switching between background suppression/evaluation |
| Diameter of the light spot | 75 x 75 mm by sensing range 2000 mm |
| Indicators/operating means |
| Function indicator | LED red |
| Control elements | Sensing range adjuster, light-on/dark-on changeover switch, changeover switch for mode of operation Background suppression / Background evaluation ; Adjuster for edge monitoring left/right |
| Factory setting | Background suppression |
| Electrical specifications |
| Operating voltage | 17 ... 30 V DC , 18 ... 28 V AC |
| No-load supply current | < 100 mA |
| Input |
| Test input | emitter deactivation with U = 17 ... 30 V DC only in background evaluation mode of operation and DC operation |
| Output |
| Switching type | Light-on/dark-on changeover switch |
| Signal output | Relay, 1 alternator |
| Switching voltage | max. 24 V DC , 48 V AC |
| Switching current | ≤ 1 A |
| Switching power | 24 W / 55 VA |
| Response time | 30 ms , 2 s after test |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN 61000-6-2, EN 61000-6-3 |
| Approvals and certificates |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| UN/ECE Regulation No. 10 (E1) | Type-approval number: 047349 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Housing length L | 330 mm |
| Mounting height | max. 2500 |
| Degree of protection | IP52 |
| Connection | screw terminals |
| Material | |
| Housing | aluminum / ABS |
| Optical face | PC |
| Mass | approx. 200 g |
| Dimensions | |
| Height | 42 mm |
| Depth | 37 mm |
| Length | 330 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
TOPSCAN2-8-HS-2500-1/L330/38a
Product Documentation:
TOPSCAN2-8-HS-2500-1/L330/38a
Design / Simulation:
TOPSCAN2-8-HS-2500-1/L330/38a
Approvals:
TOPSCAN2-8-HS-2500-1/L330/38a
相關產品:
TOPSCAN2-8-HS-2500-1/L330/38a
| Accessories |
|
|
|
| Pedestal for the sensor module AIR16fa |
|
|
|
|
| Flexible metal conduit, Protection against contamination and damagefa |
|
|
|
|
| Connecting cable for sensor modules, Length 300 mmfa |
|
|
|
|
| End cover for series TopScan-S aluminum profile sectionfa |
|
|
|
|
| Polyurethane foam seal for increased degree of protection to IP54, Simple insertion into the TopScan-S profile section behind the capfa |
|
|
|
|
| Aluminum profile for TopScan-S Series, Length 1400 mmfa |
|
|
|
|
| Profile cover for aluminum profile for TopScan2 Series, Length 1400 mmfa |
|
|
|
|
| Weather protection cover for sensing strips, Protection from adverse effects of weather such as rain, snow, etc., Can be cut to the required lengths, Retrofitting possible with already installed sensing stripsfa |
|
+886 2 27227708