请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
ML100-8-HGU-100-IR/102/115/162
| 產品描述 |
| Convergent mode sensor, 100 mm adjustable detection range, infrared light, light/dark on, NPN output, fixed cable |
| General specifications |
| Detection range | 7 ... 100 mm |
| Adjustment range | 30 ... 100 mm |
| Reference target | standard white, 100 mm x 100 mm |
| Light source | IRED |
| Light type | modulated infrared light |
| Polarization filter | no |
| Diameter of the light spot | approx. 7 mm x 50 mm at 100 mm |
| Opening angle | Emitter: 4 ° vertical ; 25 ° horizontal |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 |
| Functional safety related parameters |
| MTTFd | 860 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green: power on |
| Function indicator | LED yellow: lights when object is detected |
| Control elements | Sensing range adjuster |
| Control elements | Light-on/dark-on changeover switch |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 20 mA |
| Output |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light-on |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | 500 Hz |
| Response time | 1 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | approx. 50 g |
| Tightening torque, fastening screws | 0.6 Nm |
| Dimensions | |
| Height | 31 mm |
| Width | 11 mm |
| Depth | 20 mm |
| Cable length | 2 m |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC001821 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
ML100-8-HGU-100-IR/102/115/162
Product Documentation:
ML100-8-HGU-100-IR/102/115/162
Design / Simulation:
ML100-8-HGU-100-IR/102/115/162
Approvals:
ML100-8-HGU-100-IR/102/115/162
相關產品:
ML100-8-HGU-100-IR/102/115/162
| Accessories |
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Mounting aid for ML100 series, Mounting bracketfa |
|
|
|
|
| Mounting aid for ML100 series, Mounting bracketfa |
|
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Mounting aid for ML100 series, Mounting bracketfa |
|
|
|
|
| Mounting aid for ML100 series, Mounting bracketfa |
|
|
|
|
| Mounting aid for ML100 seriesfa |
|
|
|
|
| Mounting aid for ML100 seriesfa |
|
|
|
|
| Mounting bracket , Simple installation, Robust construction, Secure mounting, Mounting head and foot may be independently rotated through 360°fa |
|
+886 2 27227708