请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
OMH-WTS10-01
產品描述 |
Mounting bracket for sensors of WTS10 series |
General specifications |
Accessories provided | Incl. 2 x compressed air connection for 4 mm hose diameter Incl. 4 x fixing screws M4 x 25 for sensor WTS10 |
Mechanical specifications |
Mech. capacity | Max. tong pressure of 5KN |
Material | Aluminum / steel |
Mass | 523 g |
Dimensions | |
| Height | 55 mm |
| Width | 70 mm |
| Length | 99.7 mm |
Suitable series |
Series | WTS10 |
Classifications
System | Classcode |
ECLASS 13.0 | 27273701 |
ECLASS 12.0 | 27273701 |
ECLASS 11.0 | 27273701 |
ECLASS 10.0.1 | 27273701 |
ECLASS 9.0 | 27273701 |
ECLASS 8.0 | 27279202 |
ECLASS 5.1 | 27279202 |
ETIM 9.0 | EC003015 |
ETIM 8.0 | EC003015 |
ETIM 7.0 | EC003015 |
ETIM 6.0 | EC003015 |
ETIM 5.0 | EC003015 |
UNSPSC 12.1 | 31162301 |
Details:
OMH-WTS10-01
Design / Simulation:
OMH-WTS10-01
相關產品:
OMH-WTS10-01
Accessory of |
|
|
|
Diffuse mode sensor, Specifically for quality checks on welding caps, Upper and lower welding caps checked simultaneously, High position and angle tolerance insensitivity of the welding cap, Stability alarm indication, Scratch resistant mineral glass lensfa |
|
|
|
|
Diffuse mode sensor, Specifically for quality checks on welding caps, Upper and lower welding caps checked simultaneously, High position and angle tolerance insensitivity of the welding cap, Stability alarm indication, Scratch resistant mineral glass lensfa |
|
|
|
|
Diffuse mode sensor, Specifically for quality checks on welding caps, Upper and lower welding caps checked simultaneously, High position and angle tolerance insensitivity of the welding cap, Stability alarm indication, Scratch resistant mineral glass lensfa |
|