请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
產品描述 |
---|
Adjustable assembly set for sizes F10 manual operated valves according to EN ISO5211 with threaded hole M12 |
General specifications | ||
---|---|---|
Suitable sensors and | Dual sensors, -F25 series with actuator BT32... Dual sensors, -F25K series with actuator BT32... Dual sensors, -F31 series with actuator BT65... Dual sensors, -F31K series with actuator BT65... Dual sensors, -F31K2 series with actuator BT65... |
|
Standard conformity | ||
Standards | DIN EN ISO 5211 / DIN 3337 | |
Mechanical specifications | ||
Material | stainless steel 1.4301 / AISI 304 for plates and sheet metal bending parts | |
Mass | 419 g | |
Dimensions | ||
Width | 64 mm | |
Length | 312 mm | |
General information | ||
Note | For the mounting set, an adapter plate and depending on this, and further accessories must be ordered. | |
Scope of delivery | Three threaded pins with hexagon socket, various lengths 2 counter nuts 1 drive screw |
System | Classcode |
---|---|
ECLASS 13.0 | 27273701 |
ECLASS 12.0 | 27273701 |
ECLASS 11.0 | 27273701 |
ECLASS 10.0.1 | 27273701 |
ECLASS 9.0 | 27273701 |
ECLASS 8.0 | 27279202 |
ECLASS 5.1 | 27279202 |
ETIM 9.0 | EC003015 |
ETIM 8.0 | EC003015 |
ETIM 7.0 | EC003015 |
ETIM 6.0 | EC003015 |
ETIM 5.0 | EC003015 |
UNSPSC 12.1 | 31162301 |
Brief Instructions | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
Mounting Instructions | ENG | 367 KB |
CAD | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 1216 KB |
Matching System Components | ||||||
---|---|---|---|---|---|---|
|
||||||
|