Signal Converter with Trip Value KFU8-USC-1.D

1-channel signal conditioner
Universal usage at different power supplies
Scaleable current or voltage input
Current or voltage output
Relay contact output
Configurable by keypad
Line fault detection (LFD)

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
配套产品

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:

產品規格摘要：的技術資料 KFU8-USC-1.D

General specifications
Signal type		Analog input
Supply
Connection		terminals 14, 15
Rated voltage		20 ... 90 V DC / 48 ... 253 V AC
Rated current		≤ 80 mA DC / ≤ 45 mA AC
Power consumption		≤ 1.6 W / ≤ 2.6 VA
Input
Connection side		field side
Connection		terminals 1+, 3- : mV, V ; terminals 2+, 3- : mA
Input resistance		voltage: 1 MΩ , current: max. 100 Ω
Limit		30 V
Current		0 ... 20 mA
Voltage		0 ... 10 V / 0 ... 60 mV
Resolution		15 Bit
Output
Connection side		control side
Connection		output I: terminals 10, 11, 12 output II: terminals 7-, 8+, 9-
Output I		signal, relay
	Contact loading	250 V AC/2 A/cos φ 0.7; 40 V DC/2 A
	Mechanical life	2 x 10⁷ switching cycles
	Energized/De-energized delay	approx. 10 ms / approx. 10 ms
Output II		analog
	Load	current: max. 550 Ω , voltage: min. 1 kΩ
	Analog voltage output	0/1 ... 5 V , 0/2 ... 10 V
	Analog current output	0/4 ... 20 mA
Transfer characteristics
Deviation		0.1 % of full-scale value
	Resolution/accuracy	current: 1 µA/20 µA voltage: 0.5 mV/10 mV mV: 3 µV/60 µV
	Influence of ambient temperature	0.003 %/K (30 ppm)
Reaction time		≥ 150 ms/≤ 300 ms
Galvanic isolation
Input/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Input/power supply		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Output/power supply		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Indicators/settings
Display elements		display
Control elements		Control panel
Configuration		via operating buttons
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		150 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
	Height	119 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210107
ECLASS 12.0	27210107
ECLASS 11.0	27210107
ECLASS 10.0.1	27210107
ECLASS 9.0	27210107
ECLASS 8.0	27210107
ECLASS 5.1	27210107
ETIM 9.0	EC002475
ETIM 8.0	EC002475
ETIM 7.0	EC002475
ETIM 6.0	EC002475
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFU8-USC-1.D

Informative Literature: KFU8-USC-1.D

Literature	語言	檔案類型	檔案尺寸
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB

Product Documentation: KFU8-USC-1.D

Safety and Security Documentation	語言	檔案類型	檔案尺寸
Instruction manual	ENG	PDF	41 KB
Manuals
Manual KF**-USC-1.D	ENG	PDF	395 KB
System Manual	ENG	PDF	3694 KB

Design / Simulation: KFU8-USC-1.D

CAD	語言	檔案類型	檔案尺寸
CAD 3-D / CAD 3-D	ALL	STP	3123 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	52 KB

Approvals: KFU8-USC-1.D

Declaration of Conformity	證書號碼	語言	檔案類型	檔案尺寸
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2364A	ALL	PDF	100 KB

相關產品: KFU8-USC-1.D

Matching System Components

	K-DUCT-GY Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of field and control signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

快速連結

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證