请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
UBE15M-H1
General specifications |
Sensing range | 0 ... 15000 mm , emitter - receiver synchronised |
Transducer frequency | approx. 40 kHz |
Opening angle | ± 45 ° at -6 dB |
Temperature drift of echo propagation delay | 0.2 %/K |
Electrical specifications |
Operating voltage | 16 ... 30 V DC , ripple 10 %SS 8 V DC with reduced transmitting power |
No-load supply current | ≤ 10 mA (typ. 6 mA at UB = 24 V DC) |
Input |
Input type | 1 pulse input for transmitter pulse, activation through open collector npn < 1.5 V: emitter active, > 3.5 V: emitter inactive |
Pulse length | 100 µs ... 10 ms |
Pause length | ≥ 50 x pulse length |
Approvals and certificates |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | 0 ... 50 °C (32 ... 122 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Degree of protection | IP00 |
Connection | Contact plugs and soldering surfaces |
Mass | 20 g |
Dimensions | Printed circuit board: 45 mm x 20.2 mm (5 mm separable: 40 mm x 20.2 mm) overall height: 10 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27272801 |
ECLASS 12.0 | 27272801 |
ECLASS 11.0 | 27272801 |
ECLASS 10.0.1 | 27272801 |
ECLASS 9.0 | 27272801 |
ECLASS 8.0 | 27272801 |
ECLASS 5.1 | 27272801 |
ETIM 9.0 | EC001847 |
ETIM 8.0 | EC001847 |
ETIM 7.0 | EC001847 |
ETIM 6.0 | EC001847 |
ETIM 5.0 | EC001847 |
UNSPSC 12.1 | 41111960 |
Details:
UBE15M-H1
Product Documentation:
UBE15M-H1
Design / Simulation:
UBE15M-H1