请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
UDC-18GM50-400-3E3
| General specifications |
| Sensing range | 20 ... 60 mm , optimal distance: 45 mm |
| Transducer frequency | 395 kHz |
| Indicators/operating means |
| LED green | indication: single sheet detected |
| LED yellow | indication: no sheet detected (Air) |
| LED red | indication: double sheet detected |
| Electrical specifications |
| Operating voltage | 18 ... 30 V DC , ripple 10 %SS |
| No-load supply current | < 50 mA |
| Time delay before availability | < 500 ms |
| Input |
| Input type | Function input
0-level: -UB ... -UB + 1V
1-level: +UB - 1 V ... +UB |
| Pulse length | ≥ 100 ms |
| Impedance | ≥ 4 kΩ |
| Output |
| Output type | 3 switch outputs PNP, NC |
| Rated operating current | 3 x 100 mA , short-circuit/overload protected |
| Voltage drop | ≤ 3 V |
| Switch-on delay | approx. 15 ms (shorter response time on request) |
| Switch-off delay | approx. 15 ms (shorter response time on request) |
| Pulse extension | min. 120 ms programmable |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2:2020
IEC 60947-5-2:2019 |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | cable PVC , 2 m |
| Core cross section | 0.14 mm2 |
| Degree of protection | IP67 |
| Material | |
| Housing | nickel plated brass; plastic components: PBT |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 135 g |
| Dimensions | |
| Length | 50 mm |
| Diameter | 18 mm |
| General information |
| Supplementary information | Switch settings of the external programming adapter:
"output load": pull-down
"output logic": inv |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27272801 |
| ECLASS 12.0 | 27272801 |
| ECLASS 11.0 | 27272801 |
| ECLASS 10.0.1 | 27272801 |
| ECLASS 9.0 | 27272801 |
| ECLASS 8.0 | 27272801 |
| ECLASS 5.1 | 27272801 |
| ETIM 9.0 | EC001847 |
| ETIM 8.0 | EC001847 |
| ETIM 7.0 | EC001847 |
| ETIM 6.0 | EC001847 |
| ETIM 5.0 | EC001847 |
| UNSPSC 12.1 | 41111960 |
Details:
UDC-18GM50-400-3E3
Product Documentation:
UDC-18GM50-400-3E3
Design / Simulation:
UDC-18GM50-400-3E3
Approvals:
UDC-18GM50-400-3E3
Software:
UDC-18GM50-400-3E3
相關產品:
UDC-18GM50-400-3E3
| Accessories |
|
|
|
| Programming adapter, USB 2.0 interface, Simple insertion in the sensor connection leadfa |
|
|
|
|
| Extension cable for UDB... and UDC...fa |
|
|
|
|
| Mounting bracket for double sheet monitorfa |
|
|
|
|
|
| Extension cable for UDB... and UDC...fa |
|
|
|
|
| Male cordset, M12, 5-pin, PUR cable with WAGO terminalsfa |
|
|
|
|
| Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa |
|
|
|
|
| Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa |
|
+886 2 27227708