请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
ENI58IL-H12YY5-1024UD1-RSY:01
General specifications |
Detection type | photoelectric sampling |
Linearity error | ± 0.025 ° |
Pulse count | 25 |
Functional safety related parameters |
MTTFd | 140 a |
Mission Time (TM) | 20 a |
L10 | 15 E+9 at 3000 rpm |
Diagnostic Coverage (DC) | 0 % |
Electrical specifications |
Operating voltage | 4.75 ... 30 V DC |
No-load supply current | max. 50 mA |
Output |
Output type | push-pull or RS422 (universal output driver, output level depending on input voltage) |
Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected |
Output frequency | max. 400 kHz |
Rise time | 300 ns |
Phase position A to B | |
| Pulse counts < 3600 | 90 ° ± 9 ° electrical |
| Pulse counts ≥ 3600 | 90 ° ± 15 ° electrical |
Duty cycle | 1/2 ± 10 % |
Connection |
Fixed cable with plug | cable ∅6 mm, 4 x 2 x 0.14 mm2 , L = 0.4 m 9-pin Sub-D connector |
Standard conformity |
Degree of protection | DIN EN 60529, IP65 |
Climatic testing | DIN EN 60068-2-78 , no moisture condensation |
Emitted interference | EN 61000-6-4:2007/A1:2011 |
Noise immunity | EN 61000-6-2:2005 |
Shock resistance | DIN EN 60068-2-27, 300 g, 6 ms |
Vibration resistance | DIN EN 60068-2-6, 30 g, 10 ... 2000 Hz |
Approvals and certificates |
UL approval | E223176 , cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure , if UL marking is marked on the product. For use in NFPA 79 Applications only. adapters providing field wiring on request |
| Maximum permissible ambient temperature | max. 80 °C (max. 176 °F) |
Ambient conditions |
Operating temperature | -40 ... 85 °C (-40 ... 185 °F) , cable, fixed installation -5 ... 85 °C (23 ... 185 °F) , cable, movable installation |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Material | |
| Housing | 3.2315 aluminum (AlMgSi1, saltwater-proof) |
| Flange | 3.2315 aluminum (AlMgSi1, saltwater-proof) |
| Shaft | Hollow shaft Stainless steel |
Mass | < 300 g without cable |
Rotational speed | max. 6000 min -1 |
Moment of inertia | ≤ 70 gcm2 |
Starting torque | ≤ 1.5 Ncm |
Shaft load | |
| Angle offset | max. 1 ° |
| Axial offset | max. 1 mm |
Dimensions | |
| Diameter | 58.5 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270501 |
ECLASS 12.0 | 27270501 |
ECLASS 11.0 | 27270501 |
ECLASS 10.0.1 | 27270501 |
ECLASS 9.0 | 27270501 |
ECLASS 8.0 | 27270501 |
ECLASS 5.1 | 27270501 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Details:
ENI58IL-H12YY5-1024UD1-RSY:01
相關產品:
ENI58IL-H12YY5-1024UD1-RSY:01
Accessories |
|
|
|
Female cordsetfa |
|
|
|
|
Female cordsetfa |
|
|
|
|
Female cordset, M12, 8-pin, shielded, PVC cablefa |
|
|
|
|
Female cordset, M12, 8-pin, shielded, PVC cablefa |
|
|
|
|
Female cordset, M12, 8-pin, shielded, PVC cablefa |
|