请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
60-69*1
General specifications |
Pulse count | max. 1250 |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | max. 80 mA |
Output |
Output type | push-pull, incremental |
Voltage drop | < 4 V |
Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected |
Output frequency | max. 50 kHz |
Rise time | 250 ns |
De-energized delay | 250 ns |
Connection |
Terminal compartment | with cable gland PG7 |
Standard conformity |
Degree of protection | DIN EN 60529, IP50 |
Emitted interference | EN 61000-6-4:2007/A1:2011 |
Noise immunity | EN 61000-6-2:2005 |
Ambient conditions |
Operating temperature | |
| Plastic disk | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | |
| Plastic disk | -40 ... 60 °C (-40 ... 140 °F) |
Mechanical specifications |
Material | |
| Housing | nickel-plated plastic |
| Flange | Diecast zinc |
| Shaft | Stainless steel 1.4305 / AISI 303 |
Mass | approx. 400 g |
Rotational speed | max. 6000 min -1 |
Moment of inertia | ≤ 36 gcm2 |
Starting torque | ≤ 1 Ncm |
Shaft load | |
| Axial | 40 N |
| Radial | 60 N |
Classifications
System | Classcode |
ECLASS 13.0 | 27270501 |
ECLASS 12.0 | 27270501 |
ECLASS 11.0 | 27270501 |
ECLASS 10.0.1 | 27270501 |
ECLASS 9.0 | 27270501 |
ECLASS 8.0 | 27270501 |
ECLASS 5.1 | 27270501 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Details:
60-69*1
相關產品:
60-69*1
Accessories |
|
|
|
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa |
|