请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
General specifications | ||
---|---|---|
Pulse count | 1024 and 2048 | |
Functional safety related parameters | ||
Safety Integrity Level (SIL) | SIL 3 | |
Performance level (PL) | PL e | |
MTTFd | 1000 a | |
Mission Time (TM) | 20 a | |
PFHd | 2.41 E-9 1/h | |
L10 | 7.5 E+9 at 6000 rpm | |
Diagnostic Coverage (DC) | 98 % | |
Electrical specifications | ||
Operating voltage | 5 V DC ± 5 % | |
No-load supply current | max. 70 mA | |
Output | ||
Output type | sine / cosine | |
Amplitude | 1 Vss ± 10 % | |
Load current | max. per channel 10 mA , short-circuit protected, reverse polarity protected | |
Output frequency | max. 200 kHz (3 dB limit) | |
Connection | ||
Cable | Single stranded wires with crimp contact, 10 x AWG26, 230 mm | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP40 | |
Climatic testing | DIN EN 60068-2-78 , no moisture condensation | |
Emitted interference | EN 61000-6-4:2007/A1:2011 | |
Noise immunity | DIN EN 61000-6-2 , advanced testing level to IEC 61326-3-1 EN 61326-3-1:2008 |
|
Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
Vibration resistance | DIN EN 60068-2-6, 20 g, 55 ... 2000 Hz | |
Functional safety | IEC 61508:2010 (SIL3) EN 62061:2005/A2:2015 EN/ISO 13849-1:2015 IEC 61800-5-2:2016 Suitable up to SIL 3, PL e depending from configuration, see instruction leaflet |
|
Approvals and certificates | ||
UL approval | cULus Recognized, General Purpose, Class 2 Power Source | |
TÜV approval | Cert. no. Z10 068273 0003 | |
Ambient conditions | ||
Operating temperature | -20 ... 115 °C (-4 ... 239 °F) , cable, fixed installation | |
Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
Mechanical specifications | ||
Material | ||
Housing | aluminum, blank | |
Flange | 3.1655 aluminum | |
Shaft | Stainless steel 1.4305 / AISI 303 | |
Mass | approx. 350 g | |
Rotational speed | max. 8000 min -1 | |
Moment of inertia | ≤ 25 gcm2 | |
Starting torque | ≤ 1.5 Ncm | |
Shaft load | ||
Axial | 40 N at max. 6000 rpm 10 N at max. 8000 rpm |
|
Radial | at 60 N max. 6000 rpm at 20 N max. 8000 rpm |
System | Classcode |
---|---|
ECLASS 13.0 | 27270501 |
ECLASS 12.0 | 27270501 |
ECLASS 11.0 | 27270501 |
ECLASS 10.0.1 | 27270501 |
ECLASS 9.0 | 27270501 |
ECLASS 8.0 | 27270501 |
ECLASS 5.1 | 27270501 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Brief Instructions | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 1364 KB | |
Safety and Security Documentation | |||
Instruction manual | ENG | 153 KB |