请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
產品描述 |
---|
AS-Interface power supply, data decoupling, 2,8 A |
General specifications | ||
---|---|---|
UL File Number | E223176 | |
MTBF | 221 a | |
Indicators/operating means | ||
LED AS-i ok | LED green: ON: AS-Interface voltage OK OFF: overload or no supply voltage |
|
Electrical specifications | ||
Fusing | 2.5 AT (not replacable) | |
Capacity factor | > 0.5 | |
Rated operating voltage | nominal: 100 ... 120 VAC/220 ... 240 VAC permissible: 85 ... 132 VAC/184 ... 264 VAC |
|
Rated operating current | 2.0 A at 115 VAC 0.9 A at 230 VAC |
|
Supply frequency | 47 ... 63 Hz | |
Efficiency | 90.5 % (230 VAC, 2.8 A) | |
Output | ||
Current limit | > 3.2 A | |
Voltage | 30.55 VDC ± 3 % fixed setting | |
Current | 2.8 A | |
Residual ripple | ≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load) | |
Short-circuit current | min. 3.2 A, max. 4.6 A | |
Compliance with standards and directives | ||
Directive conformity | ||
Low Voltage Directive 2006/95/EC | EN 60950-1:2006, EN 61204-3:2001 | |
EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-3:2007, EN 50295:1999 | |
Standard conformity | ||
Electromagnetic compatibility | EN 61000-6-2:2005; EN 61000-6-3:2007 | |
AS-Interface | EN 50295:1999, IEC 62026-2:2006 | |
Mech. capacity | EN 60068-2-6:2008 | |
Shock and impact resistance | EN 60068-2-27:1995 | |
Ambient conditions | ||
Ambient temperature | -10 ... 70 °C (14 ... 158 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Shock and impact resistance | 15g/6 ms 10g/11 ms |
|
Vibration resistance | 2 ... 17,8 Hz / 1.6 mm 17.8 ... 500 Hz / 2.0 g |
|
Pollution degree | 2 (EN 60950) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Protection class | I, Protective conductor connection necessary | |
Connection | Connection terminals, max. conductor cross-section 0.5 ... 6 mm2 (20-10 AWG), Stripping length 7 mm | |
Mass | approx. 500 g | |
Dimensions | ||
Height | 124 mm | |
Width | 49 mm | |
Length | 102 mm | |
Mounting | DIN mounting rail |
System | Classcode |
---|---|
ECLASS 13.0 | 27040301 |
ECLASS 12.0 | 27040301 |
ECLASS 11.0 | 27040301 |
ECLASS 10.0.1 | 27040301 |
ECLASS 9.0 | 27040301 |
ECLASS 8.0 | 27040301 |
ECLASS 5.1 | 27040301 |
ETIM 9.0 | EC002540 |
ETIM 8.0 | EC002540 |
ETIM 7.0 | EC002540 |
ETIM 6.0 | EC002540 |
ETIM 5.0 | EC002540 |
UNSPSC 12.1 | 39121004 |
Brief Instructions | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 262 KB |
CAD | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 16846 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 80 KB |
Certificates | 證書號碼 | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|---|
US CA UL | E223176 | ALL | LINK | --- |
US CA UL | CoC E223176 RptRef E223176-20070416 | ALL | 444 KB | |
Worldwide AS-International Association AS-Interface | 92901 | ALL | 585 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4815A | ALL | 164 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|