请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
產品描述 |
---|
Printed circuit board module 2 NAMUR inputs and 1 electronic output |
General specifications | ||
---|---|---|
Node type | A/B node | |
Indicators/operating means | ||
LED PWR/FAULT | dual LED green/red LED 1 green: AS-Interface voltage OK LED 1 red: communication error or address is 0 LED 1 green/red flashing: short-circuit or lead breakage |
|
LED IN | 2 LEDs yellow; LED 2 yellow illuminated: switching state IN1 ON, otherwise OFF LED 3 yellow illuminated: switching state IN2 ON, otherwise OFF |
|
Electrical specifications | ||
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
Rated operating current | ≤ 40 mA (without sensors) / max. 150 mA | |
Protection class | III | |
Input | ||
Number/Type | 2 inputs for NAMUR Sensors | |
Supply | from AS-Interface | |
Voltage | 8 V | |
Input current | ≤ 8 mA (limited internally) | |
Switching point | OFF ≤ 1.2 mA ON ≥ 2.1 mA according to DIN EN 60947-5-6 |
|
Output | ||
Number/Type | 1 electronic output, switched low, overload and short-circuit proof, lead breakage and short-circuit monitored | |
Supply | from AS-Interface | |
Voltage | 21 ... 31 V | |
Current | max. 100 mA | |
Standard conformity | ||
Degree of protection | EN 60529:2000 | |
AS-Interface | EN 62026-2:2013 | |
Programming instructions | ||
Profile | S-D.A.E | |
IO code | D | |
ID code | A | |
ID1 code | 7 | |
ID2 code | E | |
Data bits (function via AS-Interface) | ||
D0 | ||
D1 | ||
D2 | ||
D3 | ||
Parameter bits (programmable via AS-i) | function | |
P0 | not used | |
P1 | not used | |
P2 | not used | |
P3 | not used | |
Ambient conditions | ||
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 (completely fitted) according to EN 60529 | |
Connection | screw terminal strip max. conductor cross section 1 mm2 |
|
Mass | 20 g | |
Dimensions | ||
Height | 1.6 mm | |
Width | 55 mm | |
Length | 51 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27242604 |
ECLASS 12.0 | 27242604 |
ECLASS 11.0 | 27242604 |
ECLASS 10.0.1 | 27242604 |
ECLASS 9.0 | 27242604 |
ECLASS 8.0 | 27242604 |
ECLASS 5.1 | 27242604 |
ETIM 9.0 | EC001599 |
ETIM 8.0 | EC001599 |
ETIM 7.0 | EC001599 |
ETIM 6.0 | EC001599 |
ETIM 5.0 | EC001599 |
UNSPSC 12.1 | 39121535 |
Brief Instructions | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 267 KB |
Declaration of Conformity | 證書號碼 | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2715B | ALL | 116 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
AS-Interface Switch Cabinet Module KE5 – Simple Handling and Improved Manageability
The unique housing design of the new KE5 switch cabinet module enables distinct visibility and simplifies mounting, wiring, and maintenance inside switch cabinets and junction boxes.