请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
VAZ-SW-SUITE
產品描述 |
Combined software for configuration, diagnostics, and programming, for masters and safety monitors (type KE4, K20, K30, K31) |
General specifications |
Description | VAZ-SW-ACT32: operating software for configuration, programming, AS-Interface diagnostics, and AS-Interface safety diagnostics VAZ-SW-ASIMON: configuration of safety monitors, coupling of safety monitors, diagnostic information for further processing in higher-level control systems. Documentation and configuration. System diagnostics and troubleshooting. VAZ-SW-DIAGNOSTIC: hardware diagnostics: serial numbers, software IDs, etc., device-specific parameters. AS-Interface diagnostics: detection of short circuits to ground, double addresses, and interference voltage. Measurement of the AS-Interface voltage and currents. Error counters, access to error history in the master. Safety diagnostics: safety status, display of test requirements and safety-related faults, instructions, and recommendations. |
System requirements |
Hardware requirements | 500 MB of hard disk space available Min. 256 MB working memory |
Operating system | from Windows 7 (32 and 64 bit) |
Classifications
System | Classcode |
ECLASS 13.0 | 27242607 |
ECLASS 12.0 | 27242607 |
ECLASS 11.0 | 27242607 |
ECLASS 10.0.1 | 27242607 |
ECLASS 9.0 | 27242607 |
ECLASS 8.0 | 27242607 |
ECLASS 5.1 | 27242607 |
ETIM 9.0 | EC001603 |
ETIM 8.0 | EC001603 |
ETIM 7.0 | EC001603 |
ETIM 6.0 | EC001603 |
ETIM 5.0 | EC001603 |
UNSPSC 12.1 | 39121535 |
Details:
VAZ-SW-SUITE
相關產品:
VAZ-SW-SUITE
Accessory of |
|
|
|
Safety monitor, three 2-channel secure inputs, two secure outputsfa |
|
|
|
|
KE4 control cabinet module for rotary encoders 2 safe inputs und 2 safe outputsfa |
|
|
|
|
KE4 switch cabinet module for rotary encoder Adapter for 2 rotary encoder to rotation speed monitor and control panelfa |
|
|
|
|
KE4 switch cabinet module 8 safety-related electronic outputs, each switchable with a standard output, 8 standard inputsfa |
|
Accessories |
|
|
|
Interface cable for connecting the K30/K31 Safety Monitor to a PCfa |
|
|
|
|
USB Type A to Micro-USB connectorfa |
|