Distance sensor VDM18-300/32/105/122

Analog output 4 mA ... 20 mA
High resolution
Very fast response characteristic, suitable for rapid scanning process

Technical Data
Product Documentation
Design / Simulation
Approvals
配套产品

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

將完整的規格書下載為PDF:

產品規格摘要：的技術資料 VDM18-300/32/105/122

產品描述
Universal distance sensor, measurement to object, 300 mm detection range, red laser light, laser class 2, PNP output, analog output, control input, M12 plug

General specifications
Measuring range		80 ... 300 mm
Light source		laser diode typ. service life 50,000 h at Ta = +40 °C
Light type		modulated visible red light
Laser nominal ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser class	2
	Wave length	650 nm
Light spot representation		approx. 2 mm x 4.5 mm at 300 mm
Measuring method		Laser triangulation
Ambient light limit		≤ 5000 Lux
Nominal ratings
Linearity error		0.25 % of the measuring range
Repeat accuracy		< 0.25 % of the measured value
Resolution		< 0.1 % of the measuring range
Temperature drift		< 0.02 % / °C
Indicators/operating means
Operation indicator		LED green
Function indicator		2 yellow LEDs: Switching status (each output) , 4 green LEDs: Operating mode
Control elements		Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle )
Parameterization indicator		LED red
Electrical specifications
Operating voltage		18 ... 30 V DC
No-load supply current		≤ 40 mA at 24 V DC
Protection class		II , rated voltage ≤ 50 V DC
Time delay before availability		≤ 300 ms
Input
Control input		Laser off (HIGH +UB) Keypad lock (LOW 0 V)
Output
Signal output		1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching current		max. 100 mA
Measurement output		1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm
Switching frequency		≤ 1 kHz
Response time		0.4 ms
Compliance with standards and directives
Directive conformity
	EMC Directive 2004/108/EC	EN 60947-5-2
Standard conformity
	Laser class	DIN EN 60825-1:2008, IEC 60825-1:2007
Approvals and certificates
UL approval		cULus Listed
Ambient conditions
Ambient temperature		-10 ... 60 °C (14 ... 140 °F)
Storage temperature		-20 ... 80 °C (-4 ... 176 °F)
Mechanical specifications
Degree of protection		IP67
Connection		5-pin, M12 x 1 plastic connector
Material
	Housing	ABS , impact resistant
	Optical face	PMMA
Mass		approx. 43 g
Dimensions
	Height	50 mm
	Width	17 mm
	Depth	50 mm

Classifications

System	Classcode
ECLASS 13.0	27270916
ECLASS 12.0	27270916
ECLASS 11.0	27270801
ECLASS 10.0.1	27270801
ECLASS 9.0	27270801
ECLASS 8.0	27270801
ECLASS 5.1	27270801
ETIM 9.0	EC001825
ETIM 8.0	EC001825
ETIM 7.0	EC001825
ETIM 6.0	EC001825
ETIM 5.0	EC001825
UNSPSC 12.1	41111613

Details: VDM18-300/32/105/122

Product Documentation: VDM18-300/32/105/122

Manuals	語言	檔案類型	檔案尺寸
Manual VDM18/105	ENG	PDF	1246 KB

Design / Simulation: VDM18-300/32/105/122

CAD	語言	檔案類型	檔案尺寸
CAD 3-D / CAD 3-D	ALL	STP	248 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: VDM18-300/32/105/122

Certificates	證書號碼	語言	檔案類型	檔案尺寸
Canada USA UL Ordinary Location	E87056	ALL	LINK	---
EU Pepperl+Fuchs	PF08CERT1244	ALL	PDF	503 KB

相關產品: VDM18-300/32/105/122

Accessories

	OMH-VDM18-01 Mounting aid
	Mounting accessory, distance measuring devices Series VDM18fa

	OMH-VDM18-02 Mounting aid
	Mounting accessory, distance measuring devices Series VDM18fa

General Notes Relating to Pepperl+Fuchs Product Information

台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
phone +886 2 27227708

Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證