General specifications |
Detection range | 0.03 ... 8 m |
Adjustment range | 0.05 ... 8 m |
Reference target | Kodak white (90%) |
Light type | modulated visible red light |
Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
| Laser class | 1M |
| Wave length | 660 nm |
| Beam divergence | < 25 mrad |
| Pulse length | 4 ns |
| Repetition rate | 250 kHz |
| max. pulse energy | < 2.4 nJ |
Black-white difference (6 %/90 %) | < 0.5 % |
Angle deviation | max. ± 2° |
Measuring method | Pulse Ranging Technology (PRT) |
Diameter of the light spot | vertical 60 mm , horizontal 30 mm at a distance of 2 m |
Ambient light limit | 50000 Lux |
Resolution | 12 bit, however > 0.5 mm |
Functional safety related parameters |
MTTFd | 100 a |
Mission Time (TM) | 10 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green |
Function indicator | 2 LEDs yellow for switching state |
Teach-in indicator | Teach-In: LED green/yellow equiphase flashing; 2.5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz |
Control elements | 5-step rotary switch for operating modes selection (threshold setting and operating modes) |
Control elements | Switch for setting the threshold values |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
Ripple | 10 % within the supply tolerance |
No-load supply current | ≤ 80 mA / 24 V DC |
Time delay before availability | < 0.7 s , for temperatures <-30°C compliance of the specification 5 mins after power on |
Output |
Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected , 1 analog output 0 ... 10 V |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Measurement output | 1 analog output 0 V ... 10 V ; Rmin = 1 kΩ |
Switching frequency | 50 Hz |
Response time | 5 ms |
Conformity |
Product standard | EN 60947-5-2 |
Laser safety | EN 60825-1:2014 |
Measurement accuracy |
Repeat accuracy | < 5 mm |
Approvals and certificates |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
FDA approval | IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Ambient conditions |
Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 4-pin, M12 x 1 connector |
Material | |
| Housing | Plastic ABS |
| Optical face | PMMA |
Mass | 90 g |
Dimensions | |
| Height | 88 mm |
| Width | 25.8 mm |
| Depth | 54.3 mm |