请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
PMI14V-F112-2EPE2-IO-V15
| General specifications |
| Installation | flush |
| Object distance | max. 2.5 mm |
| Measuring range | 0 ... 14 mm |
| Nominal ratings |
| Operating voltage | 10 ... 30 V |
| Reverse polarity protection | reverse polarity protected |
| Linearity error | ± 0.3 mm |
| Repeat accuracy | ± 0.05 mm |
| Resolution | 33 µm |
| Temperature drift | ± 0.5 mm |
| No-load supply current | ≤ 20 mA |
| Operating voltage indicator | LED green |
| Functional safety related parameters |
| MTTFd | 490 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Interface |
| Interface type | IO-Link |
| Mode | COM2 (38.4 kBit/s) |
| Value range | 0000h ... 7000h |
| Switching output |
| Output type | 2 Push-pull (4 in 1) outputs , 1 switch output PNP , short-circuit protected , reverse polarity protected , overvoltage protected , programmable |
| Operating current | ≤ 100 mA / Output |
| Switching hysteresis | 3-step, adjustable 0.2 m ... 0.8 mm |
| Voltage drop | ≤ 3 V |
| Short-circuit protection | pulsing |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
IEC 61131-9:2013 |
| Approvals and certificates |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Mechanical specifications |
| Connection type | 5-pin, M12 x 1 connector |
| Housing material | diecast zinc, not laquered or coated |
| Degree of protection | IP67 |
| Material | |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
| Dimensions | |
| Height | 30.5 mm |
| Width | 35 mm |
| Length | 35 mm |
| Note | The data relating to accuracy only apply to a distance to the object to be detected of 1 ... 2.5 mm. |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27274004 |
| ECLASS 12.0 | 27274004 |
| ECLASS 11.0 | 27270702 |
| ECLASS 10.0.1 | 27270702 |
| ECLASS 9.0 | 27270702 |
| ECLASS 8.0 | 27270702 |
| ECLASS 5.1 | 27270702 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 39121550 |
Details:
PMI14V-F112-2EPE2-IO-V15
Product Documentation:
PMI14V-F112-2EPE2-IO-V15
| Manuals | 語言 | 檔案類型 | 檔案尺寸 |
| Manual | ENG | PDF | 2059 KB
|
Design / Simulation:
PMI14V-F112-2EPE2-IO-V15
Approvals:
PMI14V-F112-2EPE2-IO-V15
Software:
PMI14V-F112-2EPE2-IO-V15
相關產品:
PMI14V-F112-2EPE2-IO-V15
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 5-pin, PVC cable greyfa |
|
|
|
|
| Damping element for sensors of type F90, F112, and F166; side holefa |
|
|
|
|
| Damping element for sensors of type F90, F112, and F166; front holefa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputsfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
| IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa |
|
+886 2 27227708