请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
PMI14V-F112-2EPE2-IO-Y70104219
General specifications |
Installation | flush |
Object distance | max. 2.5 mm |
Measuring range | 0 ... 14 mm |
Nominal ratings |
Operating voltage | 10 ... 30 V |
Reverse polarity protection | reverse polarity protected |
Linearity error | ± 0.3 mm |
Repeat accuracy | ± 0.05 mm |
Resolution | 33 µm |
Temperature drift | ± 0.5 mm |
No-load supply current | ≤ 20 mA |
Operating voltage indicator | LED green |
Functional safety related parameters |
MTTFd | 490 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Interface |
Interface type | IO-Link |
Mode | COM2 (38.4 kBit/s) |
Value range | 0000h ... 7000h |
Switching output |
Output type | 2 Push-pull (4 in 1) outputs , 1 switch output PNP , short-circuit protected , reverse polarity protected , overvoltage protected , programmable |
Operating current | ≤ 100 mA / Output |
Switching hysteresis | 3-step, adjustable 0.2 m ... 0.8 mm |
Voltage drop | ≤ 3 V |
Short-circuit protection | pulsing |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 IEC 61131-9:2013 |
Approvals and certificates |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Mechanical specifications |
Connection type | 2 m PUR cable , screened |
Housing material | PA 66 |
Degree of protection | IP67 |
Material | |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
Dimensions | |
| Height | 30.5 mm |
| Width | 35 mm |
| Length | 35 mm |
Note | The data relating to accuracy only apply to a distance to the object to be detected of 1 ... 2.5 mm. |
Specific Quality Characteristics |
Airtightness | solid: min. 0.5 bar (over the entire operating temperature) during 1 min: min. 3 bar (at room temperature) |
Classifications
System | Classcode |
ECLASS 13.0 | 27274004 |
ECLASS 12.0 | 27274004 |
ECLASS 11.0 | 27270702 |
ECLASS 10.0.1 | 27270702 |
ECLASS 9.0 | 27270702 |
ECLASS 8.0 | 27270702 |
ECLASS 5.1 | 27270702 |
ETIM 9.0 | EC001852 |
ETIM 8.0 | EC001852 |
ETIM 7.0 | EC001852 |
ETIM 6.0 | EC001852 |
ETIM 5.0 | EC001852 |
UNSPSC 12.1 | 39121550 |
Details:
PMI14V-F112-2EPE2-IO-Y70104219
Design / Simulation:
PMI14V-F112-2EPE2-IO-Y70104219
Approvals:
PMI14V-F112-2EPE2-IO-Y70104219
Software:
PMI14V-F112-2EPE2-IO-Y70104219
相關產品:
PMI14V-F112-2EPE2-IO-Y70104219
Accessories |
|
|
|
Damping element for sensors of type F90, F112, and F166; side holefa |
|
|
|
|
Damping element for sensors of type F90, F112, and F166; front holefa |
|
|
|
|
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa |
|
|
|
|
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa |
|
|
|
|
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa |
|