Control Unit Ex e, Panel Mount, Illuminated Pushbutton PMI.IG.I.W.10
- Illuminated pushbutton, green - 1x NO
- Ex de and Ex tb certified
- Full equipment certified
- Polyamide housing for panel mount
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Cable Gland M20 integrated in protective cover
- Degree of protection IP66
请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
產品規格摘要：的技術資料 PMI.IG.I.W.10
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 250 V max. | |
| Operating current | 16 A max. | |
| Terminal capacity | 2.5 mm2 | |
| Terminal torque | 0.8 Nm | |
| Function | illuminated pushbutton | |
| Color | green | |
| Contact configuration | 1x NO | |
| Usage category | AC15: 20 ... 250 V AC - 10 A DC13: 20 ... 24 V DC - 1 A |
|
| Number of poles | 1 | |
| Operator action | spring return | |
| Mechanical specifications | ||
| Cable type | non-armored cables | |
| Clamping range (D) | 5.5 ... 13 mm (D) | |
| Covering | Protective cap fully detachable |
|
| Cover fixing | Phillips head screw | |
| Degree of protection | IP66 | |
| Cable entry | ||
| Number of cable entries | 1x M20 cable gland in protective cover | |
| Material | ||
| Housing | Polyamide (PA) | |
| Finish | inherent color black | |
| Seal | silicone | |
| Washer gasket | silicone | |
| Mass | 150 g max. | |
| Dimensions | ||
| Height (A) | 77 mm (A) | |
| Width (B) | 44 mm (B) | |
| Depth (C) | 105 mm (C) | |
| Actuator head diameter (D2) | 39 mm (D2) | |
| Panel wall thickness (PT) | 1 ... 6 mm (PT) | |
| Diameter thru-hole (DT) | 30.6 mm (DT) | |
| Length outside enclosure (H) | 17.5 mm (H) | |
| Width across flats (SW1) | 24 mm (SW1) | |
| Total length (L) | 130 mm (L) | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 2 Nm (SW1) | |
| Mounting | via actuator head | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 50 °C (-40 ... 122 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CML 16 ATEX 3106X | |
| Marking |  II 2 GD Ex de IIC T6 Gb Ex tb IIIC T80 °C Db |
|
| International approvals | ||
| IECEx approval | IECEx CML 16.0046X | |
| UKCA approval | CML 21 UKEX 21275X | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Usage category | IEC / EN 60947 | |
| CE marking | 0080 or 0102, see type label | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27144052 |
| ECLASS 12.0 | 27144052 |
| ECLASS 11.0 | 27144052 |
| ECLASS 10.0.1 | 27144052 |
| ECLASS 9.0 | 27144052 |
| ECLASS 8.0 | 27144052 |
| ECLASS 5.1 | 27371228 |
| ETIM 9.0 | EC000522 |
| ETIM 8.0 | EC000522 |
| ETIM 7.0 | EC000522 |
| ETIM 6.0 | EC000522 |
| ETIM 5.0 | EC000522 |
| UNSPSC 12.1 | 39121314 |
台灣倍加福有限公司
信義路5段150巷2號21樓之4
信義區
11059 台北市 臺灣
臺灣
fa-info@tw.pepperl-fuchs.com
+886 2 27227708
© 2025 版權所有
Pepperl+Fuchs 倍加福是領先全球的電子感測器 和 零組件的開發與製造商. 超過七十年的不斷創新、穩定的品質與持續的業績增長，成就了今日的我們， Pepperl+Fuchs 倍加福在全球擁有 6,300 名員工，並在德國、美國、新加坡、匈牙利、印尼和越南都設有製造工廠，其中多數工廠已通過 ISO 9001 認證